Anyone using a DTM front bumper?

[GarrettReid]

I'm looking for something a little more aggressive then the stock bumper, but not something like a ricer. An S-line bumper would be perfect but I can't find any that would fit a non S-line car.

Which brings me to my point, if you could post a picture of your bumper, along with what kind it is that would be awesome.

[BLopes07]

what do u mean you cant find any that will fit? an sline bumper fit on an non sline lol i did it, the only thing different is the grille.

[cellg8]

http://www.audizine.com/forum/showth...tle?highlight=

[GarrettReid]

Can you link me somewhere I can get one? The front lip looks a little different too.

[GarrettReid]

http://www.audizine.com/forum/showth...tle?highlight=

Well you defiantly sold me on the bumper and wheels.

[BLopes07]

i think the original 15 spoke rims that come with a dtm s4 pull off the look way better. but looks good anyways

[GarrettReid]

i think the original 15 spoke rims that come with a dtm s4 pull off the look way better. but looks good anyways

I can't comment on the 15 spoke rims, but the rs4 rims look almost as perfect as wheels get.

[BLopes07]

i have the titaniums and i know this one chick that used to live on my block with a dtm s4 silver one with the 15 spoke silver rims.. just looked amazing but ive seen many dtms come with rs4's or the 15 spoke i think made by ronal...i know my titaniums are

[GarrettReid]

I'm not a huge fan of the bbs/lots of spokes look. You're car looks pretty sweet. I think the RS4 wheels are about as many spokes as I'd really want to go up to.

[intoblue]

[cellg8]

^ OMG...STUNNING! More pics of your car, please!

[GarrettReid]

For a yellow car that thing looks WILD

[intoblue]

^Thank you. I will post more pics up soon.

[intoblue]

Yea it has a pretty nasty GROWL too! LOL

[GarrettReid]

Are those the gun metal RS4 wheels?

[intoblue]

They are onyx black VMR708's. Second set and they are flaking again. Oh well.

[thirdgenab]

I might have an s line kicking around my shop... I'll lok in the am. Hope the scrap guy didn't take it yet.

[Tooney]

[GarrettReid]

That's pretty much exactly what I'm trying to get mine to look like

[GarrettReid]

what do u mean you cant find any that will fit? an sline bumper fit on an non sline lol i did it, the only thing different is the grille.

Can you link me somewhere I can get one?

[Merlin00069]

Can you link me somewhere I can get one?

Did you ever get a reply on this? Im interested as well. Thanks.

[B18b1ex]

Nice grill, how have you been stranger?

[intoblue]

Nice grill, how have you been stranger?

Good Good. Just enjoying being a dad every day. Have not been down in your neck of the woods for a while since I started working at Chariots. How've you been??
Doing some maintenance items on my car this weekend. Let me now if you need anything done on your car. My buddy is pretty competent and very fair.

[GarrettReid]

Did you ever get a reply on this? Im interested as well. Thanks.

http://oemplus.com/index.php?main_pa...roducts_id=558

Or at an Audi dealer. The Audi dealer is oddly $100's cheaper then that site.

Alternative option would be get one from eBay. Their half as much there.

[channad]

I use a DTM bumper...the whole kit was pretty cheap...around $1500 painted and installed!!!! :)

[GarrettReid]

I use a DTM bumper...the whole kit was pretty cheap...around $1500 painted and installed!!!! :)

How much was install? I'm going S-line now, which theoretically was supposed to be cheaper then a full DTM

[Kyokio]

How much was install? I'm going S-line now, which theoretically was supposed to be cheaper then a full DTM

fyi.. $1500 is the cost of the dtm exterior pkg when you order the car from audi, not the actual cost of doing a dtm conversion.

[GarrettReid]

fyi.. $1500 is the cost of the dtm exterior pkg when you order the car from audi, not the actual cost of doing a dtm conversion.

"around $1500 painted and installed!!!! :)"

That wording leads me to believe he bought it after the initial purchase of the car. Or he wouldn't of had to get it installed.

[Kyokio]

"around $1500 painted and installed!!!! :)"

That wording leads me to believe he bought it after the initial purchase of the car. Or he wouldn't of had to get it installed.

lol .. there's a reason he put the smiley face there. anyway.. his car is a dtm s4 from the factory (the option costs $1500).

btw, i've done the dtm conversion after purchase.. it costs a helluva lot more that $1500 painted and installed.

[fly300kts]

Coming from non S-line, I did a complete dtm conversion (Front, Side, Rear) and can tell you that you will need to drop more $$ than $1500. For info, the carbon lip alone is around $800

Phil

[shaddai]

"around $1500 painted and installed!!!! :)"

That wording leads me to believe he bought it after the initial purchase of the car. Or he wouldn't of had to get it installed.

Factory installed. Mine was too.

[Audiman44]

Factory installed. Mine was too.

Me three

Here is a recent picture i took with my cell phone:

[channad]

yes...I ordered my car from Ingolstadt that way. I was just being silly. There was a white A4 Avant with a DTM front that was just PURE SEX!!!

I love the DTM package, and would wonder why anyone would want anything else.

Anyway, I've seen that people have spent lots of money doing this mod, it's easier to do it if you have a non-S-line A4, since the grilles are the same.

[mioStile]

Yee Channad YEE!

And OP - hope this helps. Side profile of DTM kit. Also lets me be vain.

[Quattro]

Me three

Here is a recent picture i took with my cell phone:

that the mtm CF hood? you are a fucking baller.

[Au-V]

Does anyone have a picture of a their DTM bumper but in White by any chance??

[B18b1ex]

To those of you running a DTM bumper, Be careful thieves are out there and they want your cf lip. I found 10 of the 19 screws missing from mine one morning. I have since remedied the situation so it will not happen again.

[GarrettReid]

To those of you running a DTM bumper, Be careful thieves are out there and they want your cf lip. I found 10 of the 19 screws missing from mine one morning. I have since remedied the situation so it will not happen again.

Would you share the solution with us? I'm flip flopping on DTM or S-Line, it's been two months since I made this tread and still can't fully decide lol.

[moondev]

Is there anything available to "spice up" the b6 front end?

[B18b1ex]

Would you share the solution with us? I'm flip flopping on DTM or S-Line, it's been two months since I made this tread and still can't fully decide lol.

I used a high strength epoxy resin for metals to cover all of the screws, there are also plastic resins available to make both parts as one. I figured the only time it would ever come off is in an accident and then they can replace the whole damn thing. It sucks that I have to go to those lengths to keep my own shit.