Audizine - An Automotive Enthusiast Community

Results 1 to 3 of 3
  1. #1
    Active Member Two Rings BIGexpectations's Avatar
    Join Date
    Oct 21 2010
    AZ Member #
    65988
    Location
    San Antonio Texas

    2.8 intake tube problem

    Guest-only advertisement. Register or Log In now!
    so i was putting on cone filter intake and found that the hard plastic tube that fits up to the TB was not all the way on and wiggled back and forth.
    So i unscrewed the top screw and took it off to find that there was another hole on the back end that looks like it should have had a bolt through it but there was none.
    I looked around the TB and couldnt even see where it would screw into even if there was one?
    I put everything back together and pushed the plasic tube on as snug as i could and took it for a drive it came right back off!?

  2. #2
    Active Member Two Rings BIGexpectations's Avatar
    Join Date
    Oct 21 2010
    AZ Member #
    65988
    Location
    San Antonio Texas

    Also a quick question about the hose comping from the secondary air pump that goes into the oem air box...what should i do with this once i put the cone filter on?

  3. #3
    Active Member Two Rings BIGexpectations's Avatar
    Join Date
    Oct 21 2010
    AZ Member #
    65988
    Location
    San Antonio Texas

    okay so i found what i need but i still have no idea where the bolt screws into


    please help haha

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.