Just finished up running in my engine on a base tune and have had the following fault codes consistenly come up:-

17881 - EVAP Leak Detection Pump
P1473 - 35-00 - Open Circuit
17863 - Exhaust Gas Temp Sensor 1 (G235)
P1455 - 35-00 - Implausible Signal
17930 - Camshaft Adjustment; Bank 2
P1522 - 35-00 - Malfunction
17867 - Exhaust Gas Temp Sensor 2 (G236)
P1459 - 35-10 - Implausible Signal - Intermittent
17521 - Oxygen (Lambda) Sensor; B1 S1
P1113 - 35-10 - Internal Resistance too High - Intermittent

Not too worried about the EVAP as the module doesn't work properly and I'll need to replace it.

The EGT's are a worry though. I thought I may have put them in on the wrong sides but they are colour coded brown and black and the plugs only clip in one way.
If I'm throwing these EGT codes could it be that they have failed and will need to be replaced?

As for the Camshaft Adjustment the rubber boot that plugs into the sensor has split a little so may have frayed but this has only happened to one of them, what the chance both sensros have failed.......or could my timing be out a tooth???

I've also done some logs recently and awaiting my revision so I'd like to sort out these faults asap.