Anybody actually successfully get a "custom" downpipe?

[Coderedpl]

I've done some searching and I saw posts that people had plans to get a downpipe custom made and stuff but there have been no updates whether or not it was actually done.

I have a tiptronic and as far as i know the option is the Labree. ~300 i think it is?

just wondering if anybody went the custom route at a muffler shop and how much it cost? I'm highly considering it to have a no restriction system.

[Trile]

i have a tiptronic and went with the 034 tp...

[rvca3112]

Labree got mine to me in a week. 250 for the dp and 75 dollars over night shipping from Cali to nj. I think rai motorsports has one for 500.

[Coderedpl]

I'll be asking around for a custom one, well see what happens

[D0lphinGrey]

I have a custom 3" downpipe, works pretty well for me.



tiptronic too.

[A4B7Quattro]

I have a BILLYBOAT testpipe and a labree downpipe im selling both fit tiptronic i sent you a pm with the prices

[harryd14]

how much did your custom DP run you with installation?

[Sales@RAI]

We have a tiptronic downpipe available. 3" from the turbo back to the slip fitting.

[Coderedpl]

Prices are killing me :(

[Sprode]

We have a tiptronic downpipe available. 3" from the turbo back to the slip fitting.

I wear this one. Quality manufacturing.

[Insane_Audi]

I wear this one. Quality manufacturing.

x2, thats what i will be getting

and you can get a HFC with it for only 100 extra, screw 034's HFC for 300

[Charles]

I have a custom DP. Guy hacked off the flange from my cat, cleaned it up, then welded it to 3" SS tubing and worked his way back. Took about 2 hours. So, labor, plus parts...maybe $150-200. I got a whole exhaust, so I'm not sure how much he would have charged me for the DP alone.

[Coderedpl]

I have a custom DP. Guy hacked off the flange from my cat, cleaned it up, then welded it to 3" SS tubing and worked his way back. Took about 2 hours. So, labor, plus parts...maybe $150-200. I got a whole exhaust, so I'm not sure how much he would have charged me for the DP alone.

I called a place and this seems about right.

[RedS-line]

The labree dp + hfc is a nice combo but it sounds very farty at startup before the revs drop and no i dont know why- fyi

[TFSI]

The labree dp + hfc is a nice combo but it sounds very farty at startup before the revs drop and no i dont know why- fyi

is that your current exhaust setup? Just labree dp and hfc?

[Charles]

I have a custom DP. Guy hacked off the flange from my cat, cleaned it up, then welded it to 3" SS tubing and worked his way back. Took about 2 hours. So, labor, plus parts...maybe $150-200. I got a whole exhaust, so I'm not sure how much he would have charged me for the DP alone.

Looks like I slightly misunderstood. I thought this was about a Test Pipe, not a Down Pipe. However, I'd assume the same process could be used. Probably take less time cause the DP is more accessible under the car. No need to lower and raise the car during mock up.

[TFSI]

can anybody with just testpipe or hfc w/ aftermarket downpipe, stock exhaust make some video clips?

[AudiA4S]

I'm thinking of going with the 3" High Flow cat pipe from H2Sport.

http://www.h2sport.com/products.php?productid=1221

[RightonRed]

We have a tiptronic downpipe available. 3" from the turbo back to the slip fitting.

x3 Loved my RAI HFC with the stock exhaust! Deeper note and decent gains even with the HFC. Definitely helped the lag (between the turbo and the tranny). Felt like driving a nice V6.

Red