Which Wheels Would You Choose?

**rlee6462** · 10-09-2010 05:59 PM

I would like to put wheels on my car in the near future, but I can't decide on what wheels I would like. Here are a few that I was thinking about. The first pic is of my car. The second 3 pics are Tenzo wheels. I believe I was reading in somewhere in AZ that he had to do something special for these to fit. They are my favorite out of the 3, but I'm not sure they will work on a B6 S4 without to much hassle. Does anybody know what would have to be done? If you like the Tenzo wheels, what color would you go with? They are the Type M version 1 or 2. http://www.tenzoracingsports.com/main.php?page=wheels
The third picture is of the VMR v710's, I don't know if I would go gunmetal or brushed with these if I went that route. Third, is the RPM 505's. The fourth is a pic of a sick ass vette, love the wheels, but I'm not sure they would look good on a S4. Please vote on which one is your favorite.

Tenzo Wheels-Type M version 1 or 2 (Not sure)

VMR v710

RPM 505

Sick Vette, Not sure what kind of wheels

**BWALb5** · 10-09-2010 06:04 PM

the vettes on 360 FORGED Mesh Eight wheels. go on stanceworks they have a whole article about it on the first page.

**BASARAB** · 10-09-2010 06:18 PM

I like first pic with 5 spokes

**S4 Big Head** · 10-09-2010 06:27 PM

I was under the impression that the wheels on the vette were DPE SP-C16.. or are they the same thing? My friend has wheels that look exactly like that on his S5.. I duno I'm probably wrong though

**rlee6462** · 10-09-2010 06:31 PM

I think you're right ^
I couldn't find the article. I was also looking and the 360 Forged Mesh eight wheels look different than what are on the vette. The 360's have a lip, these do not.

**CARTEL** · 10-09-2010 09:13 PM

Honestly, the stock Avus 18" wheels are better looking than any of those. Lowered, spacers, done. My opinion, anyway.

**jstilt** · 10-09-2010 10:13 PM

vette wheels ftw..........must have more concave

710's are played out, thats why I want to sell mine.

**rlee6462** · 10-09-2010 11:35 PM

I talked to DPE and the wheels on the vetter are not DPE's. Anybody know what kind they are? I saw it in a thread earlier on AZ, but I can't find it anymore. Anybody know which one?

**BUD-S4** · 10-10-2010 01:18 AM

F) None of the above.

OR the Vet wheels, but they wont have anything close to that concave when fitted for an S4.

**rlee6462** · 10-10-2010 09:38 AM

Anybody know how to get the Tenzo's to fit??? The VMR 710's gunmetal have the lead so far.

**BUD-S4** · 10-10-2010 10:02 AM

Originally Posted by rlee6462

Anybody know how to get the Tenzo's to fit??? The VMR 710's gunmetal have the lead so far.

Look up the thread where you found the pics of the Tenzo's, he talks about how he fit them. Also, you wont be able to fit the same offset as what he was running. He did a custom widebody in the rear, FYI. I have always liked the look of his car, but those wheels aren't the best quality... or so I've heard.

**rlee6462** · 10-10-2010 10:09 AM

Originally Posted by BUD-S4

Look up the thread where you found the pics of the Tenzo's, he talks about how he fit them. Also, you wont be able to fit the same offset as what he was running. He did a custom widebody in the rear, FYI. I have always liked the look of his car, but those wheels aren't the best quality... or so I've heard.

Shoot I didn't know he did a custom widebody. The thread I read of his it didn't mention anything about it. Do you have the link?

**BUD-S4** · 10-10-2010 10:18 AM

Originally Posted by rlee6462

Shoot I didn't know he did a custom widebody. The thread I read of his it didn't mention anything about it. Do you have the link?

I'll look for it.

Edit:

about the widebody:

Quote Originally Posted by italian a4 1032 View Post
i thought i read in eurotuner that this car had a widebody but it doesnt look like it?

yeah about 2" its very subtle tho u can only tell one there is another one parked next to it, i kept the stock curvature to it and the stock bodyline , keep in mind those are 19x10 et 20 and there cover by the fender, i can fit 2 people in the back with no rubbing wat so ever

Wheels:

as for the wheels
after putting them on my boys turbo 350z (19x10 all around) i decided i had to have them!! thanks to the wonderful invention called wobble bolts and custom machined hub rings i order tenzo type m 19x8.5 et17 and 19x10 et22, im happier then a pig in mud!!!!!

**rlee6462** · 10-10-2010 10:35 AM

Originally Posted by BUD-S4

I'll look for it.

Edit:

about the widebody:

Wheels:

After you said something about the widebody, I can tell now. I guess I wasn't paying attention. Wonder if I can get different offsets so they will work on my car?? What do wobble bolts do?

**BWALb5** · 10-10-2010 01:24 PM

http://www.stancenation.com/2010/10/...r6x/#more-7089

**oblu** · 10-10-2010 03:10 PM

Tenzo type M v2 in 5x112. http://www.elementwheels.com/proddet...Dtypemv21985bm

No way you're going to get that level of concave out of et45 though.

**rlee6462** · 10-10-2010 04:17 PM

Originally Posted by oblu

Tenzo type M v2 in 5x112. http://www.elementwheels.com/proddet...Dtypemv21985bm

No way you're going to get that level of concave out of et45 though.

The Tenzo's aren't concave, so I'm a little confused.

**drew** · 10-10-2010 04:44 PM

the ones i have on

**lENrok1** · 10-10-2010 05:25 PM

http://www.rotiform.com/products_for...oncave_blq.htm

**oblu** · 10-10-2010 05:39 PM

Originally Posted by rlee6462

The Tenzo's aren't concave, so I'm a little confused.

The 19x10 sure looks plenty concave; and the 19x8.5 et17 has a nice concave around the hub. 19x8.5 et45 is going to be a lot flatter around the hub area.

**rlee6462** · 10-10-2010 05:44 PM

Originally Posted by oblu

The 19x10 sure looks plenty concave; and the 19x8.5 et17 has a nice concave around the hub. 19x8.5 et45 is going to be a lot flatter around the hub area.

I'm even more confused. Are you going from the bottom up?

**lENrok1** · 10-10-2010 07:01 PM

http://www.stancenation.com/2010/07/22/simplicity-101/

**cotmfk** · 10-10-2010 07:34 PM

That is a sick Vette! I voted V710 brushed.

**gear_head81** · 10-10-2010 07:52 PM

the S5 wheels in Matte Chrome

**rlee6462** · 10-10-2010 08:03 PM

Those are sick! ^

**VMRWheels** · 10-10-2010 10:52 PM

Hehe, No need saying where my vote goes!

If you ever have any questions about pricing and/or availability, don't hesitate to shoot me a PM!

**GameBreaker** · 10-11-2010 10:23 AM

I would go with the VMRs. I really like the Tenzo's, but I would really hate cleaning them where as with the VMRs I would only be slightly annoyed.

**dparm** · 10-11-2010 10:41 AM

Honestly, I would not go with any of those.

**J0HN_R1** · 10-11-2010 11:29 AM

If money's no issue... Forgiato Wheels, top 3 are MonoLegerra line... http://www.forgiato.com/

These wheels are available in ANY size & color-combo, you pick the colors of the face/barrel/flange/etc...

They're priced accordingly though, about $1200 each wheel...

**SoCalS4Avant** · 10-11-2010 11:41 AM

Originally Posted by J0HN_R1

If money's no issue...

If money's no issue - HRE.

**BUD-S4** · 10-11-2010 01:23 PM

Originally Posted by SoCalS4Avant

If money's no issue - HRE.

This.

Those Drea wheels look like could be super sexy with the right color combo.

**rlee6462** · 10-11-2010 10:24 PM

I wish money was no issue :(

**jstilt** · 10-12-2010 11:46 AM

and when is money not an issue.

if u haven't unlimted funds then you better be sporting somthing pretty sick that no one else has ever seen............as far as wheels that is.

**rlee6462** · 10-12-2010 09:40 PM

If money was no issue I would be sporting this.
http://www.youtube.com/watch?v=uOUm1Nyh_xg

**rlee6462** · 10-13-2010 05:26 PM

VMR 710s gunmetal have the lead.

**Jung** · 10-13-2010 06:15 PM

everyone and their mom has 710s, skip.

**rlee6462** · 10-13-2010 06:22 PM

Not much out there for good wheels on a S4 that don't cost an arm and leg.

**cam** · 10-13-2010 06:45 PM

buy my works. custom cut for a b6/b7 s4. and i actually think they would look better on a b6 than they do on my b7

**B6JoeS4** · 10-13-2010 07:51 PM

Rotiform MIA's are badass wheels at a decent price ~300 per wheel. I wonder how much they weigh though

**rlee6462** · 10-13-2010 09:08 PM

Originally Posted by cam

buy my works. custom cut for a b6/b7 s4. and i actually think they would look better on a b6 than they do on my b7

Let's see them.

View Poll Results: Which Wheels Are Your Favorite

Thread: Which Wheels Would You Choose?

Thread Tools

Display

Which Wheels Would You Choose?

Bookmarks

Bookmarks

Posting Permissions