MANUAL, NON-Lumbar, HEATED seats to POWER, LUMBAR, HEATED

**n7plus1** · 10-07-2010 08:14 AM

So basically ill be gaining POWER SEAT function and LUMBAR. I cannot find anything on whether or not this is a direct swap or not. Ive found DIY HEATED seats write-up..nothing else. PLEASE HELP BITCHES!

**dougyfresh** · 10-07-2010 08:30 AM

search fail

try again. it is there. you didn't try hard enough.

**onceover** · 10-07-2010 08:31 AM

nice ninja edit doug.

**AudiA4Turbo22** · 10-07-2010 08:33 AM

ABSOLUTELY NOT! Go to Kufatec's website and order the harness for the heated and power seats. I did this swap on my car and had to run the power wire from the fuse box, under the carpet, to the seats and splice them in.

I suggest you buy the harness and be done with it.

**JoshDub** · 10-07-2010 09:17 AM

We have swapped in a passenger power seat into a 1.8T a4 no problems. We just placed the fuse. It was plug and play.

**bez101** · 10-07-2010 09:22 AM

as above plug an play swap fuse out for a 30 amp

**heateris** · 10-07-2010 09:28 AM

Easy swap. for the driver side, you'll need to swap a fuse under the steering wheel. For the passengers side, swap the fuse in the lower A pillar.

The seats will bolt and plug right in.

**AudiA4Turbo22** · 10-07-2010 12:58 PM

WRONG WRONG WRONG.

If he has NO lumbar on either seat, he has ZERO power going to the seats as there is no power line running to them.

I had to run a power line to each one of the front seats to get them to work.

There is no existing plug and play module there.

Trust me

**n7plus1** · 10-07-2010 03:33 PM

fuck...perhaps im not using the correct words to search doug..

**AudiA4Turbo22** · 10-07-2010 03:38 PM

here I did it for you:

http://www.audizine.com/forum/showth...heated%20seats

**n7plus1** · 10-07-2010 03:40 PM

so is this what i need?:
http://kufatec.com/index.php?main_pa...roducts_id=227

i have heated seats already so would that all i need for power movement and lumbar?

**n7plus1** · 10-07-2010 03:40 PM

Originally Posted by AudiA4Turbo22

here I did it for you:

http://www.audizine.com/forum/showth...heated%20seats

thanks for the help kirk

**AudiA4Turbo22** · 10-07-2010 03:43 PM

Anytime for my main man Nate.

**n7plus1** · 10-07-2010 03:50 PM

ok so ive seen the thread posted at the beginning of the thread you gave me kirk....this may have NOTHING to do with what i need, but in this pic:

the green plug is being plugged into nothing....

**Blitzkrieg989** · 10-07-2010 03:57 PM

Originally Posted by AudiA4Turbo22

WRONG WRONG WRONG.

If he has NO lumbar on either seat, he has ZERO power going to the seats as there is no power line running to them.

I had to run a power line to each one of the front seats to get them to work.

There is no existing plug and play module there.

Trust me

Truth

**AudiA4Turbo22** · 10-07-2010 03:57 PM

Correct, I believe the green was for Memory seats if I am not mistaken.

1 plug goes nowhere I remember that.

**Matt@EuropaParts** · 10-07-2010 06:45 PM

Originally Posted by AudiA4Turbo22

Correct, I believe the green was for Memory seats if I am not mistaken.

1 plug goes nowhere I remember that.

Nah, iirc green was for more than just memory...I need to go back and look at my install notes. I feel like if he wants power/lumbar he'll need that other end of the green plug...

**pkny** · 10-07-2010 07:01 PM

I thought all A4's had at least power lumber.
Now i wonder what the lowest trim A4 actually had and if it was the same price as a fully equipped jetta 1.8t

**n7plus1** · 10-08-2010 06:58 AM

son of a bitch...this is giving me a headache

**n7plus1** · 10-08-2010 06:58 AM

Originally Posted by n7plus1

so is this what i need?:
http://kufatec.com/index.php?main_pa...roducts_id=227

i have heated seats already so would that all i need for power movement and lumbar?

can anyone verify this for me?

**AudiA4Turbo22** · 10-08-2010 10:44 AM

get this:

http://kufatec.com/index.php?main_pa...roducts_id=225

The green one is for seat heating and the red is for seat power.

**audi_nightrider** · 10-08-2010 12:36 PM

Sticky this!

Let me get this straight....I have an 02 B6 and since I already have power lumbar and heated seats....all I have to change is the fuse? and everything else is plug and play? and this is for both driver and passenger seats?

**Turbavanttro** · 10-08-2010 02:57 PM

I have an entire oem interior wiring harness 4 you, it has everything you need to wire it up. I bought it to convert my system to full power/heat, then didn't go through with it. PM me if you want it.

You will need to run wires, so use OEM!

**Matt@EuropaParts** · 10-08-2010 07:32 PM

Originally Posted by audi_nightrider

Sticky this!

Let me get this straight....I have an 02 B6 and since I already have power lumbar and heated seats....all I have to change is the fuse? and everything else is plug and play? and this is for both driver and passenger seats?

As long as all the wiring is present on the car side, then yeah, you just need to add the appropriate fuses

**Blitzkrieg989** · 10-08-2010 07:58 PM

Originally Posted by audi_nightrider

Sticky this!

Let me get this straight....I have an 02 B6 and since I already have power lumbar and heated seats....all I have to change is the fuse? and everything else is plug and play? and this is for both driver and passenger seats?

Correct. Plug and play swap change 10 fuse to a 30.

**audi_nightrider** · 10-08-2010 10:57 PM

oh alright, thanks matt and justin.

sweet....now time to source some cheap power seats - does it matter if it comes from a b7? or not at all since they have similar interior components?

**n7plus1** · 10-10-2010 08:02 AM

ill have to take a look at my plugs under the seat.

Thread: MANUAL, NON-Lumbar, HEATED seats to POWER, LUMBAR, HEATED

Thread Tools

Display

MANUAL, NON-Lumbar, HEATED seats to POWER, LUMBAR, HEATED

Bookmarks

Bookmarks

Posting Permissions