Audizine - An Automotive Enthusiast Community

Results 1 to 14 of 14
  1. #1
    Senior Member Two Rings tre-oh411's Avatar
    Join Date
    Mar 15 2010
    AZ Member #
    56124
    My Garage
    2010 BMW 335i
    Location
    New Jersey

    front bumper!! wooop!!

    Guest-only advertisement. Register or Log In now!
    your thoughts on this front bumper. be nice.

    http://www.myhotaudi.com/audi/Extrem..._103223/615455

  2. #2
    Active Member Three Rings BAB1990's Avatar
    Join Date
    Jun 26 2010
    AZ Member #
    60719
    Location
    Canada

    Poor fitment.
    Mods:
    Full-Race -|- Tial 44mm Wastegate -|- 5557E BB PTE -|- Custom Downpipe -|- 630 Injectors -|- Maestro Tuned -|-Open Dump -|- Custom Intercooler piping -|- Built Bottom End -|- AMB top (Soon to be AEB) -|- 355 BBK 4 Pot BBK -|- KW V1 -|- 19"V710's 9.5 Rear Matte Black -|- Authentic Otty Front -|- Authentic ABT Sides -|- Black Vinyl Roof -|- Too many to list

  3. #3
    Established Member Two Rings jimbro's Avatar
    Join Date
    Mar 05 2010
    AZ Member #
    55610
    My Garage
    02 Denim Blue Avant
    Location
    HI State

    its a knockoff oetti...get the real deal!

  4. #4
    Senior Member Two Rings tre-oh411's Avatar
    Join Date
    Mar 15 2010
    AZ Member #
    56124
    My Garage
    2010 BMW 335i
    Location
    New Jersey

    extreme dimensions says they have great fitment because they're so flexable. is this false? haha

  5. #5
    Veteran Member Four Rings
    Join Date
    Aug 17 2009
    AZ Member #
    46503
    Location
    Pittsburgh

    those things require MAJOR MAJOR modification to fit properly. Many times they need to be cut in half and have material removed from the middle in order to fit width correctly. Also, there are no NO mounting tabs, so you have to pay a shop to fit it, then blend it, then paint it. After all is said and done, you'll pay twice the price of an authentic oettinger piece to make that look nice.

  6. #6
    Veteran Member Four Rings
    Join Date
    Aug 17 2009
    AZ Member #
    46503
    Location
    Pittsburgh

    Quote Originally Posted by ExtremeDimensions website View Post
    Levels of Difficulty is a subjective scale of 1 to 5 to describe ease of installation of each ground effect and wide body kit listed in our catalog where 1 signifies easy, 5 signifies very difficult and 2 to 4 fall somewhere between 1 and 5.
    HAhahahahahahaha-no shit!

  7. #7
    Veteran Member Four Rings nein-reis's Avatar
    Join Date
    Feb 01 2008
    AZ Member #
    24781
    My Garage
    MK6 GTI, MK1 GTI 1.8T, B7 A4 TE Avant
    Location
    SLC, Utah

    "myhotaudi.com" lol... thats a rip off otti, there are much better reps out there... or just get the real thing.
    -Tyler-
    Built 06A/IE Cams/IE 2.0 stroker/GT3076/6MTQ
    Dan Shank Super Tuned

    It was a fun run, but the time has gone.

  8. #8
    Senior Member Two Rings tre-oh411's Avatar
    Join Date
    Mar 15 2010
    AZ Member #
    56124
    My Garage
    2010 BMW 335i
    Location
    New Jersey

    any recomendations on a rep? i dont want to spend over 500 on the bumper itself. i have a shop installing it for me for cheap.

  9. #9
    Veteran Member Four Rings pondside36's Avatar
    Join Date
    Feb 15 2008
    AZ Member #
    25286
    My Garage
    AWE powered B6 1.8T
    Location
    Severna Park, MD

    I would get something oem, like S4 or USP DIY for that price and fitment will be just right. It will also line up with the side skirts and rear. The otty hangs lower and will look like poop if you have stock side skirts. Cheap just isn't in the works for doing a proper front after the bumper, install, paint, and grills.
    Goodwood Green is money...$$$$
    Arclight "You need to post pics already Pondside - enough w/ the prom dress teaser BS!"

  10. #10
    Veteran Member Four Rings alpinestar180's Avatar
    Join Date
    Dec 07 2009
    AZ Member #
    51741
    My Garage
    1980 kz750ltd
    Location
    north new jersey/boston, ma

    i hate to sound like a dick, but ... "buy nice or buy twice" reps usually just dont fit as well as the real thing.
    2002 B6 A4 1.8TQM Sport suspension swap, RS4 rear Swaybar, joey mod, plasti-dipped front grills, and rear trunk trim.

    Diode Mod!!

    -Andrew

  11. #11
    Veteran Member Four Rings alpinestar180's Avatar
    Join Date
    Dec 07 2009
    AZ Member #
    51741
    My Garage
    1980 kz750ltd
    Location
    north new jersey/boston, ma

    and that website seems like a bunch of shit look at this product that they sell:

    http://www.myhotaudi.com/audi/Omix/S...11237-1/582627

    is there any audi ever made that features an externally mounted spare tire on the rear like that?
    2002 B6 A4 1.8TQM Sport suspension swap, RS4 rear Swaybar, joey mod, plasti-dipped front grills, and rear trunk trim.

    Diode Mod!!

    -Andrew

  12. #12
    Veteran Member Four Rings michgo's Avatar
    Join Date
    Oct 21 2007
    AZ Member #
    21956
    My Garage
    Wagon/Variant/Avant A4 B6
    Location
    SoCal

    The manufacturer of that bumper is actually.... not that bad.

    But others are right. If you get this bumper I HIGHLY suggest you get sides too and have a lot of other work ready to go. It will not look nearly as nice as you will want it to without the supporting body mods.

    And yes, "buy nice or buy twice".
    I heart wagons.


    'It's actually a pretty big pet peeve of mine when people mess around with my photos', MmmBoost

    shave it mold it sand it paint it

  13. #13
    Veteran Member Four Rings michgo's Avatar
    Join Date
    Oct 21 2007
    AZ Member #
    21956
    My Garage
    Wagon/Variant/Avant A4 B6
    Location
    SoCal



    This is how I know My car back in the day with Reiger sides and OEM front
    I heart wagons.


    'It's actually a pretty big pet peeve of mine when people mess around with my photos', MmmBoost

    shave it mold it sand it paint it

  14. #14
    Senior Member Two Rings BRSox307's Avatar
    Join Date
    Aug 16 2007
    AZ Member #
    20354
    Location
    CT


Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.