Audizine - An Automotive Enthusiast Community

Results 1 to 9 of 9
  1. #1
    Senior Member Two Rings CowtownSteve's Avatar
    Join Date
    May 30 2010
    AZ Member #
    59678
    Location
    Calgary

    Will these winters fit my s4?

    Guest-only advertisement. Register or Log In now!
    Tires are 225/45-18 Dunlop Wintersport M3, approx 90% life left!
    Wheels are Audi S4 replicas 18x8.5 ET25 5x112 Silver
    Package includes tire pressure monitors (TPMS) for the S4


    What do you think?
    Will I have any issues?

  2. #2
    Senior Member Two Rings dkky996's Avatar
    Join Date
    Jul 04 2010
    AZ Member #
    61024
    My Garage
    2008 Porsche RS60 Spyder, 2008 Mercedes Benz CLS550
    Location
    Louisville

    Not sure et25 is gonna work...

  3. #3
    Active Member One Ring
    Join Date
    Oct 02 2009
    AZ Member #
    48700
    Location
    Montreal

    Do they have a centerbore of 57.1 or 66.6? The B8 S4 uses wheels with a centerbore of 66.6 but my understanding is that previous generations used 57.1.

    8.5 inch wheels with et 25 will stick out 3/4 inch more than the stock 19 inch wheels.

  4. #4
    Active Member Four Rings Okan509's Avatar
    Join Date
    Sep 30 2009
    AZ Member #
    48590
    Location
    b

    Et 28 is the lowest I would ever run in the front on an 8.5 inch wheel, and that's with modification to fenders and running thin ass rubber band tires. These will not work, and like said above I don't think the bore is correct.

    et32 and up is usually what works in the front on an 8.5 inch wheel.

  5. #5
    Veteran Member Four Rings L0U's Avatar
    Join Date
    Sep 03 2009
    AZ Member #
    47271
    My Garage
    18 R8 RWS, 20 RS3, 21 RS6, 04 Ducati SS1000DS
    Location
    Canada

    That might just fit, but running a stretched snow tire that flush to the bodywork is an epik fail. That is huge aggressive for a summer setup...no way I'd do that in winter.

    We have seen 225s on et30.5 8.5" and it had a wee bit of room for some more. 5.5et extra might fit, but it would be close.
    2021 Suzuka RS6
    2020 Nardo RS3
    2018 Ibis R8 RWS

  6. #6
    Senior Member Two Rings CowtownSteve's Avatar
    Join Date
    May 30 2010
    AZ Member #
    59678
    Location
    Calgary

    ok thanks for the advice, I found that set of kijiji and was curious. I'll keep looking

  7. #7
    Active Member Two Rings
    Join Date
    Jan 06 2010
    AZ Member #
    52993
    Location
    Yardley, PA

    what does et mean anyway?

  8. #8
    Senior Member Two Rings dkky996's Avatar
    Join Date
    Jul 04 2010
    AZ Member #
    61024
    My Garage
    2008 Porsche RS60 Spyder, 2008 Mercedes Benz CLS550
    Location
    Louisville

    ^ et is German prefix for wheel offset.

  9. #9
    Senior Member Three Rings Audi0005's Avatar
    Join Date
    Jan 12 2006
    AZ Member #
    9664
    Location
    ottawa. Ont

    hey on the topic and not to hi jack!

    i got 2 sets of 17's (oem s4 2000 and a6) and 1 set 18in of bbs ch's(stock s4)! i tried the the 17's it fits over the caliper but doesn't clear the centerbore. anyway to machin that out? or add spacers or anything?

    didn't try the 18's but spacers of center bore? anyone with answer would be good! wouldnt have to buy new wheels......

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.