Differences between a C5 Rs6 Plus and a C5 RS6

[anthony911]

For those who were ever interested in knowing what the differences were in the RS6 Plus vs the Rs6

2004 Audi RS6 plus 	See all Audi models
Wheelbase 	2759 mm 	108.6 in 	
Track 	front 	1578 mm 	62.1 in 	
rear 	1587 mm 	62.5 in 	
Length 	4852 mm 	191 in 	
Width 	1850 mm 	72.8 in 	
Height 	1452 mm 	57.2 in 	
Length:wheelbase ratio 	1.76
Ground clearance 			
Kerb weight 	1880 kg 	4145 lb 	
Weight distribution
(Front) 	
Fuel capacity 	82 litres 	18 UK Gal 	21.7 US Gal
aerodynamics
2004 Audi RS6 plus 	See all Audi models
Drag coefficient 	0.350
Frontal area 	2.20 m2
Cx 	0.77
engine
2004 Audi RS6 plus 	See all Audi models
Bore × stroke 	84.50 mm × 93.00 mm
3.33 in × 3.66 in
Cylinders 	V-8
Displacement 	4.2 litre
4172 cc
(254.591 cu in)
Type 	DOHC
Key:

SOHC
    Single overhead camshaft

DOHC
    Double overhead camshaft

OHV
    Overhead valves

TS
    Two stroke

SV
    Side valves

Sl
    Sleeve valves

oise
    Overhead inlet side exhaust

See more...
5 valves per cylinder
40 valves in total
Construction 	
Sump 	Wet sumped
Compression ratio 	9.80:1
Fuel system 	SMPFi
Maximum power 	479.6 PS (473.0 bhp) (352.7 kW)
@ 6000-6400 rpm
Specific output 	113.4 bhp/litre
1.86 bhp/cu in
Maximum torque 	560.0 Nm (413 ft·lb) (57.1 kgm)
@ 1950-6000 rpm
bmep 	1686.8 kPa (244.6 psi)
Specific torque 	134.23 Nm/litre
Maximum rpm 	
Manufacturer 	Audi
Code 	
Main bearings 	
Coolant 	Water
Bore/stroke ratio 	0.91
Unitary capacity 	521.5 cc/cylinder
Aspiration 	Turbo
Compressor type 	twin turbochargers
Intercooler 	Y
Catalytic converter 	Y
performance
2004 Audi RS6 plus 	See all Audi models
	
0-50 mph (80 km/h) 	3.60 s
0-60 mph 	
0-100 km/h 	4.90 s
0-100 mph 	10.70 s
80-120 km/h (50-70 mph) in top 	
Standing ¼mile 	12.50 s
@ 107.50 mph
Standing km 	
Top speed 	280 km/h (174 mph)
Fuel consumption 	21.8/10.4/14.6 l/100km urban/extra-urban/overall
CO2 Emissions 	350.0 g/km
Carfolio Calculated CO2 ? 	
Power-to-weight 	251.6 bhp/ton
chassis
2004 Audi RS6 plus 	See all Audi models
Engine location 	Front
Engine alignment 	Longitudinal
Drive 	AWD

Key:

FWD
    Front wheel drive

RWD
    Rear wheel drive

AWD
    All wheel drive

4WD
    Four wheel drive

 
Steering 	rack & pinion PAS
Turns lock-to-lock 	2.500
Turning circle 	11.70 m
Suspension 	front 	I.4Li.CS.ARB.
rear 	I.DW.ARB.
	Key:

I
    Independent

LA
    Live axle

dD
    de Dion axle

W
    Wishbone

DW
    Double wishbones

CS
    Coil springs

ARB
    Anti-roll bar

LS
    Leaf springs

SE
    Semi-elliptic leaf springs

See more...
Wheels 	front 	9J x 19
rear 	9J x 19
Tyres	front 	255/35 R 19
rear 	255/35 R 19
Brakes F/R 	VeDi/VeDi-S-ABS

Key:

Ve
    Ventilated

Di
    Disc (Disk)

Dr
    Drum

S
    Servo-assisted

ABS
    Anti-lock Braking System

Brake ∅	front 	365 mm
rear	335 mm
Braked area 	
Transmission 	5A
Top gear ratio 	0.80
Final drive ratio 	3.20

Carfolio.com ID	93720
bodywork
2002 Audi RS6 	See all Audi models
Type	4/5S SAL

Key:

SAL
    Saloon (Sedan)

FHC
    Fixed-head coupé

DHC
    Drop-head coupé (Convertible)

HBK
    Hatchback

EST
    Estate (Station Wagon)

See more...
Designer	
Number of doors 	4
dimensions & weight
2002 Audi RS6 	See all Audi models
Wheelbase 	2759 mm 	108.6 in 	
Track 	front 	1578 mm 	62.1 in 	
rear 	1587 mm 	62.5 in 	
Length 	4852 mm 	191 in 	
Width 	1850 mm 	72.8 in 	
Height 	1387 mm 	54.6 in 	
Length:wheelbase ratio 	1.76
Ground clearance 			
Kerb weight 	1840 kg 	4057 lb 	
Weight distribution
(Front) 	
Fuel capacity 	82 litres 	18 UK Gal 	21.7 US Gal
aerodynamics
2002 Audi RS6 	See all Audi models
Drag coefficient 	0.340
Frontal area 	
Cx 	
engine
2002 Audi RS6 	See all Audi models
Bore × stroke 	84.50 mm × 93.00 mm
3.33 in × 3.66 in
Cylinders 	V-8
Displacement 	4.2 litre
4172 cc
(254.591 cu in)
Type 	DOHC
Key:

SOHC
    Single overhead camshaft

DOHC
    Double overhead camshaft

OHV
    Overhead valves

TS
    Two stroke

SV
    Side valves

Sl
    Sleeve valves

oise
    Overhead inlet side exhaust

See more...
5 valves per cylinder
40 valves in total
Construction 	
Sump 	
Compression ratio 	9.30:1
Fuel system 	SMPFi
Maximum power
(EEC) 	450.2 PS (444.0 bhp) (331.1 kW)
@ 5700-6400 rpm
Specific output 	106.4 bhp/litre
1.74 bhp/cu in
Maximum torque
(EEC) 	560.0 Nm (413 ft·lb) (57.1 kgm)
@ 1950-5500 rpm
bmep 	1686.8 kPa (244.6 psi)
Specific torque 	134.23 Nm/litre
Maximum rpm 	
Manufacturer 	Audi
Code 	
Main bearings 	
Coolant 	Water
Bore/stroke ratio 	0.91
Unitary capacity 	521.5 cc/cylinder
Aspiration 	Turbo
Compressor type 	2 turbochargers
Intercooler 	
Catalytic converter 	Y
performance
2002 Audi RS6 	See all Audi models
	
0-50 mph (80 km/h) 	
0-60 mph 	
0-100 km/h 	4.90 s
0-100 mph 	
80-120 km/h (50-70 mph) in top 	
Standing ¼mile 	
Standing km 	
Top speed 	250 km/h (155 mph)
Fuel consumption 	21.8/10.4/14.6 l/100km urban/extra-urban/overall
CO2 Emissions 	350.0 g/km
Carfolio Calculated CO2 ? 	
Power-to-weight 	241.3 bhp/ton
chassis
2002 Audi RS6 	See all Audi models
Engine location 	Front
Engine alignment 	Longitudinal
Drive 	AWD

Key:

FWD
    Front wheel drive

RWD
    Rear wheel drive

AWD
    All wheel drive

4WD
    Four wheel drive

 
Steering 	rack & pinion PAS
Turns lock-to-lock 	
Turning circle 	11.40 m
Suspension 	front 	I.4Li.CS.ARB.
rear 	I.DW.ARB.
	Key:

I
    Independent

LA
    Live axle

dD
    de Dion axle

W
    Wishbone

DW
    Double wishbones

CS
    Coil springs

ARB
    Anti-roll bar

LS
    Leaf springs

SE
    Semi-elliptic leaf springs

See more...
Wheels 	front 	8.5J x 18
rear 	8.5J x 18
Tyres	front 	255/40 R 18
rear 	255/40 R 18
Brakes F/R 	VeDi/VeDi-S-ABS

Key:

Ve
    Ventilated

Di
    Disc (Disk)

Dr
    Drum

S
    Servo-assisted

ABS
    Anti-lock Braking System

Brake ∅	front 	
rear	
Braked area 	
Transmission 	5A
Top gear ratio 	0.80
Final drive ratio 	3.20

[milka]

It is interesting information but it's wrong.... Where did you get it from?

As examples:

Final drive ratio it states as 3.20:1 when in ETKA the rear Diff ratio and Gearbox Pinion Gear is 4.11:1

Also there is no difference between the following Block&bottom end, Cylinder Heads and head gasket based on ETKA all the parts are exactly the same, hence how can the compression ratios be different?

I would be surprised if there are not just a few minor changes to trims and drilled rotors std as well as an ECU remap to get the additional ~31kw in power.

[Scotty@Advanced]

It is interesting information but it's wrong.... Where did you get it from?

As examples:

Final drive ratio it states as 3.20:1 when in ETKA the rear Diff ratio and Gearbox Pinion Gear is 4.11:1

Also there is no difference between the following Block&bottom end, Cylinder Heads and head gasket based on ETKA all the parts are exactly the same, hence how can the compression ratios be different?

I would be surprised if there are not just a few minor changes to trims and drilled rotors std as well as an ECU remap to get the additional ~31kw in power.

Yeah that's a load of crap.

The big differences:

More HP due to a retune
Wheels
Interior had a few more options like funkadelic leather.
RNS-E versus NAV plus
Punched brake rotors

[p3u]

Only performance differences are different ecu map, and comes standard with the additional oil coolers behind the intercoolers, which are on all US spec RS6's. Drilled rotors are standard ( as they are in the US) and SE exhaust standard as well.

Also there was an optional sport suspension kit which lowered the car 10mm.

[wayred4.2]

+1 to Scott

[milka]

Yeah, but I think that unless the US spec ones are different from the Aus spec ones then they are not oil coolers behind the intercoolers but are actually additional radiators.....

[milka]

Scotty, are you saying my post is a load of crap? Because you pretty much just agreed with what I posted? Or are you just agreeing with my post?

Yeah that's a load of crap.

The big differences:

More HP due to a retune
Wheels
Interior had a few more options like funkadelic leather.
RNS-E versus NAV plus
Punched brake rotors