so my car told me to scratch myself (codes inside!)

[mr.awesome]

So I've had a major loss in power since i bought the thing last year, just doesn't kick nearly as much. I scanned it again today and i got these....

6 Faults Found:

18014 - Rough Road/Engine Torque Signal from ABS: Electrical Malfunction

P1606 ** 35-00 - -

17866 - Exhaust Gas Temp Sensor 2 (G236): Short to Ground

P1458 ** 35-00 - -

18111 - Limp Mode due to Control Module Reset

P1703 ** 35-10 - - - Intermittent

18088 - Reset-Resistant Limp-Mode Active

P1680 ** 35-10 - - - Intermittent

18042 - Accelerator Position Sensor 2 (G185): Signal too High

P1634 ** 35-10 - - - Intermittent

16735 - Ignition Coil (A) Primary/Secondary Circuit Malfunction

P0351 ** 35-10 - - - Intermittent

I've scanned it before and never had this many codes show up..and all of a sudden i get this.. any ideas as to how/why they would all suddenly shit the bed?

[The_Jerbel]

Sometimes when a sensor fails, it causes the other sensors the car to run poorly and the other sensors give irregular outputs.

I would replace the ABS module and the driver's side EGT sensor, clear the codes, and then see which codes re-appear.

[mr.awesome]

crap. forgot to mention. ABS control module was unplugged when i ran that. hoping it wasnt gonna require changing egt sensor. is there an affordable alternative to the oems anywhere?

[The_Jerbel]

Unfortunately, none that I know of.

[Raacerx]

used OEM. risk and crapshoot, but sometimes we just don't have $450 laying around for 2 brand new ones.