DIY Halogen to Bixenon- Conversion Complete.

[carlsA4]

The gray cables of the adapter kufatec, they are placed of the following form:

1. Net of on board (under the steering wheel) conector brown color of 17 poles to the pin 9 2. Net of on board (under the steering wheel) conector red color of 17 poles to the pin 3

Go into 09 Central Electronics

Click on Coding-07

Select Long Coding Helper

1) Change the first byte to 26 (Xenons will turn on properly after this)

2) Check Byte 02 Bit 4 (LED strip as DRL)

3) Change byte 14 and 15 to 5D (For the hi-beam to work)


ONLY, this conversion works if the net of I approach, is the version ended in "D" For example, in this photo the tests(proofs) have been realized by the net of I approach ended in 063 "A", since IT IS NOT COMPATIBLE, the long light does not work. And have fis error.
Only works 063 "D" revision, and no have fis errors


http://img121.imageshack.us/img121/7330/a55h.jpg
http://img266.imageshack.us/img266/7...1257456192.jpg

I hope that it you is of help, a greeting from españa

I got my adaptor today :) i have a questions. the two high beam wires are different colors. witch wire goes to witch connector? do i match them to the color of the conector?

[NPuter]

I got my adaptor today :) i have a questions. the two high beam wires are different colors. witch wire goes to witch connector? do i match them to the color of the conector?

the ends of the wires are labeled with Pin ** (the instructions tell you which pin goes to which connector)

[carlsA4]

the ends of the wires are labeled with Pin ** (the instructions tell you which pin goes to which connector)

lowest a4 sent them to me. thank you LA4. no instructions.. CW can you help me wit this

[carlsA4]

They are in. still need to hook up the high beams i forgot i need a metric socket set. oops. i'll send a pic tomorrow its crappy from my BB.

[NPuter]

lowest a4 sent them to me. thank you LA4. no instructions.. CW can you help me wit this

Here are the instructions for the kufatec adapters - the link will be active for 2 weeks after this post...
http://tinyurl.com/y9n8rrs

[carlsA4]

Here are the instructions for the kufatec adapters - the link will be active for 2 weeks after this post...
http://tinyurl.com/y9n8rrs

Awsome. Ill print it.

[NPuter]

Awsome. Ill print it.

cool... now that I read it again - the wire the says Pin 3 goes to the brown connector and the wire that says pin 9 goes to the red connector...

[carlsA4]

How do you remove that little magenta clip that holds the wires in the brown and magenta 17 pin connecter?