Part Number Requests

[ThatKidKG]

8E1422054AXKT

That was easy.

Jason

Lmao ugh! I swear I went to ecs and couldn't find it. You're a wizard. Thank you!
Edit so is the 1.8 rack and pinion same as 3.0?

[ECS Tuning-Audi]

Lmao ugh! I swear I went to ecs and couldn't find it. You're a wizard. Thank you!
Edit so is the 1.8 rack and pinion same as 3.0?

Haha. Yeah if you log in under your vehicle there's all the tabs on the left hand side it's under Steering >> Rack.

1.8T and 3.0 racks are the same I just logged in under 1.8T because under 3.0 we only have the OEM reman. unit up, which is $$$$$$$$. We haven't app'd over the other after market options yet, it will be done though

Jason

[ThatKidKG]

Thanks a lot! :D

[staypuft]

I need two of these little plastic pieces between the intake and intake gasket. (pic below)


I can't even figure out what they're called let alone part number. Can't find listing anywhere.

Thanks in advance

Bump...

They're called "Locating Bolts" in the eBahn program. Cannot find part #

[baungS4]

Hi
Looking for the following parts numbers. Any help will be appreciated.

1. Back cover for the headlight housing and the screws(4x). It covers the compartment where low beam, citylight(ecode model) is.

2. Battery cover.


Thanks


Sent from my iPad using Tapatalk

[ECS Tuning-Audi]

Hi
Looking for the following parts numbers. Any help will be appreciated.

1. Back cover for the headlight housing and the screws(4x). It covers the compartment where low beam, citylight(ecode model) is.

2. Battery cover.

Thanks


Sent from my iPad using Tapatalk

8E0941159B left cap
8E0941158B right cap

Unfortunately I'm not seeing a part number for the screws.

8E1819422A01C - battery cover

Jason

[Mr.Wrong]

I need two of these little plastic pieces between the intake and intake gasket. (pic below)


I can't even figure out what they're called let alone part number. Can't find listing anywhere.

Thanks in advance

Looking for the same thing as well, anyone knows P#s?

[staypuft]

Looking for the same thing as well, anyone knows P#s?

I just glued my stock ones back together, noone can find these.

[baungS4]

Can anyone help me out? I need the part# for the followings .

1. adjustment screws to adjust the levels of the headlights in the bixenon e-codes.
2. screws used to close the back cap of the lower beam headlight. If there is no part #, anyone the size of the screws?

thanks

[baungS4]

Looking for screws that holds the ballast to the headlight cover.
Anyone knows the part number or where I can get it? Tried hardware stores and autobarn but no luck

Thanks


Sent from my iPad using Tapatalk

[sitting proper]

Does anyone know what holds the left engine cover on at the front near the radiator? I have the bolt that threads into the coolant housing, but it looks like a bolt would connect to the front of the rad support.

[andru1313]

Looking for the part numbers or place to get the replacements for the RS4 carbon fiber engine covers.

I have the covers Just missing the hardware to hold it. The rubber parts. Thanks.

[New 2 EDM Whips]

Part number request:

I need the part number for the screws that hold the intake manifold tumbler flaps in place.

[baungS4]

Looking for part number for hood strut for B6S4..

Thanks in advance

[ECS Tuning-Audi]

Looking for part number for hood strut for B6S4..

Thanks in advance

Click HERE

Jason

[65vetteC6]

Looking for part number for hood strut for B6S4..

Thanks in advance

I have an OEM one, pm if you're interested.

[badger.]

Is this the hose that connects @ the back of the engine at the firewall/
8E1819371S

http://www.ecstuning.com/ES441708/

[Natebowen3]

Part # on the Jhm supplied injectors for their stg 1 b7s4 SC kit.
Waiting on their reply. I believe I can find them somewhere cheaper
IMG_2369.JPG


Sent from my iPhone using Audizine

[thesamurair]

Need part numbers for the front stabilizer bar bracket bolts, lower bolts for the rubber links. Also for what I assume is the negative cable harness going to the starter solenoid. Its the one that has the blue signal wire and the thick black cable. Has a connector with the o2 sensors. This is all for a 2004 s4 cabrio.

Sent from my SM-N950U using Tapatalk

[iselinzilla]

Piston ring question
I'm rebuilding my B7 S4 4.2l BHF and ordered a set of Audi 06e198151b rings. Turns out my piston's oil ring grooves are 2mm wide, these rings measure 3mm.

Am I using the wrong part number? I verified it with AllDataDIY and all the VW/Audi parts sellers like ECS before ordering them. I can't understand why the difference. The compression rings fit well. My rebuild is at a standstill until I sort this out.

Thanks!

[kingkron]

Hi,

I'm looking for a part number for the amplifier for a 2008 S4 Avant. (B7).

Thx in advance!

[Kling]

I need some help to find a part number for a small filter that sits on the back of the left cylinder head on a S4 2004 V8 BBK. I have searched ETKA but can't find it. See attached link for picture of it.

https://drive.google.com/file/d/1cqy...ew?usp=sharing

[freshjive]

I need some help to find a part number for a small filter that sits on the back of the left cylinder head on a S4 2004 V8 BBK. I have searched ETKA but can't find it. See attached link for picture of it.

https://drive.google.com/file/d/1cqy...ew?usp=sharing

079-103-710
Double check to see if you can see a part# on it.

[jdog6973]

Does anyone know the part number for the hold-down screw for the wiring conduit on a 2002 Audi A4 b6 3.0L AVK engine?
https://imgur.com/iDESzxy