*** OFFICIAL B8 A4 Wheel Gallery ***

[b8varian]

this information is completely useless because you haven't specified rim size. if you're talking about 19x9.5 rims at et33 and being lowered, 255s will rub hardcore. I am running those specs with 245 tires and I have my fenders rolled and still rub (my car is also slammed).

[ikotua]

this information is completely useless because you haven't specified rim size. if you're talking about 19x9.5 rims at et33 and being lowered, 255s will rub hardcore. I am running those specs with 245 tires and I have my fenders rolled and still rub (my car is also slammed).

I forgot the width.. My bad. its 19x9.5. – so no chance, eh? They are audi rims, so its a choice of et33 (A5 spec) or ET43 (A4 spec).

[Blake P]

I forgot the width.. My bad. its 19x9.5. – so no chance, eh? They are audi rims, so its a choice of et33 (A5 spec) or ET43 (A4 spec).

You can run 245's and they will fit with little to no rubbing, depending on how low you are and which tires you choose. However, I'm sure you already searched and saw that others are running that exact setup successfully...
I'm going to merge this thread with an existing one about wheel fitment, which would have been a more appropriate place for you to ask your question.

[Reinart]

Rolling on these this summer. RS6-II 20x9 ET35 hyper silver wrapped in 245/30-20 Vredestein Ultrac Sessanta

[L0U]

That is a keeper setup allright. When rims come in 35et, you have to chandeup the rubber vs. 40et. I am hoping I am exactly like that stance of yours once lowered.

[Aud!]

My TI package 19s...love these wheels I'm happy with the fact that I don't see too many of them around as well.

[turdzi]

Sweet !

I just wonder , does anyone know if it is possible to fit A5 Sportback wheels to A4 B8 without rubbing (wheels 18x8.5 ET29 , tyre 235/45/18 )
Thanx.

[Aud!]

Yeah I had 19x9 with I believe a 35 offset on my last b8...not positive on the offset and that is your biggest culprit for rubbing wheel a d tire size are secondary.

[leoqueenie]

i am running 19x8.5x245 ET35

[Aud!]

Almost look like the v8 r8 wheels...nice

[routertyty]

Corniche Monza 9x20 and 225/30R20

Those wheels are some of the nicest i've seen. Looks very good with your car.

[Okan509]

Rolling on these this summer. RS6-II 20x9 ET35 hyper silver wrapped in 245/30-20 Vredestein Ultrac Sessanta

goddamn that looks good!

[Reinart]

goddamn that looks good!

Thanks Okan :)

[Greg Nelson]

Nothing special
VMR V708, 18"x8.5", ET don't recall, 5mm H&R spacers (8mm going on rears soon)
Hyper Silver, 245/40R18 Bridgestone A/S rubber, on KW V1 coil overs



Cheers

[NPuter]

Looks great Greg! The S-Line fogs caught me off guard, but then I remembered Great work!

[Greg Nelson]

Looks great Greg! The S-Line fogs caught me off guard, but then I remembered Great work!

Thanks buddy, appreciated , and for recalling my S-Line fog grille conversion madness
Know the 18" rims aren't loved here much, and I agree.
Didn't want to go with 35 profile rubber - 19" rims were $100 more, 19" rubber was $200 more
Turning 65 tomorrow, yet mod list still not finished - wife convinced I'm crazy
Cheers

[naemcivic]

Thanks buddy, appreciated , and for recalling my S-Line fog grille conversion madness
Know the 18" rims aren't loved here much, and I agree.
Didn't want to go with 35 profile rubber - 19" rims were $100 more, 19" rubber was $200 more
Turning 65 tomorrow, yet mod list still not finished - wife convinced I'm crazy
Cheers

My fiance has also pronounced me as crazy. An early happy b`day to you Greg.

[cory_can]

Thanks buddy, appreciated , and for recalling my S-Line fog grille conversion madness
Know the 18" rims aren't loved here much, and I agree.
Didn't want to go with 35 profile rubber - 19" rims were $100 more, 19" rubber was $200 more
Turning 65 tomorrow, yet mod list still not finished - wife convinced I'm crazy
Cheers

Happy B-day Greg !!!!.....I don't know too many 60 something year olds "worried" about modding their rotors with drill/slot :). I hope I have a fraction of your enthusiasm and passion in ~30 years. .....and kudos for not driving a Buick

[Greg Nelson]

My fiance has also pronounced me as crazy. An early happy b`day to you Greg.

Should we start a chatterbox thread: Wives, Fiances, GFs Who Want to Have Their A4 Owning Men Committed
Thanks for b'day wishes
Cheers

[a4_bob]

looks really good Greg. 19" are sharp but i think 18" still look good and are practical in durability and expense.

[Greg Nelson]

Happy B-day Greg !!!!.....I don't know too many 60 something year olds "worried" about modding their rotors with drill/slot :). I hope I have a fraction of your enthusiasm and passion in ~30 years. .....and kudos for not driving a Buick

Thanks Cory Can you imagine what these cars will look like in 30 years
OMG, a Buick - hope I die before I get really old

looks really good Greg. 19" are sharp but i think 18" still look good and are practical in durability and expense.

Thanks much - best looks vs. practicality always a difficult decision
Cheers

[xbimmer06]

Just love the stance on your ride Greg. I didnt even know those were 18's, maybe the "drop" effect, anyways have a good one and Happy Birthday from the armpit of TexAss!!

[Spartan300]

Happy belated b-day Greg and as Cory-can wrote keep it up !!!

[Greg Nelson]

Appreciate the greetings everyone, why we're a community here IMO

Just love the stance on your ride Greg. I didnt even know those were 18's, maybe the "drop" effect, anyways have a good one and Happy Birthday from the armpit of TexAss!!

Texas has given us a whole bunch of killer blues guitar players and the Texas Tornados (best Tex-Mex band ever IMO).
Just hate Dallas Cowboys

Happy belated b-day Greg and as Cory-can wrote keep it up !!!

Yeah wife occasionally says keep it up I'm 65, she's 47.
Cheers

[coolwater]

Looks great Greg!
65 is the new 45!

-cW

[xiaochun3612]

This is a car I like Audi. Audi R8 most want to buy。Looks atmosphere, cool wheels.

[ModestW12]

Can someone in the know help me with identifying the below wheels posted previously in this thread. The wheels in both photos look identical at first glance. I really like the way they look in the shot with the black A4. Upon closer inspection it looks like the finish might be different on the wheels in that shot but it could just be the lighting and photography.

These are labeled Corniche Monza 9x20 and 225/30R20:



These are supposed to be 19" Stasis SE08 which someone later posted thinking they were 20's:


Any thoughts?

[Blake P]

Same thing. It's STaSIS doing what they do best... putting their brand on another company's product. Here's another replica of the same wheel (MRR HR6): http://mrrwheels.com/hr6.html

[ModestW12]

Did a google search on model names. Found some closeups. They look very similar if not identical save for the finish. What I'm trying to find is most importantly the weight of the 20's and also the available offsets.

The current forged 20's on my W12 weigh 27.6 lbs and have an offset of 46. I'm currently using H&R hubcentric spacers, 12mm on the front and 20mm on the rear.

I really like the looks of the Corniche wheels on that A4 and I think they would look great on the W12 but from what I've read so far the Stasis are cast and probably weight alot more. :/

Corniche Monza 9x20:
http://www.kamann-autosport.com/Allo...0::187390.html


Stasis SE08 9x20:

[ModestW12]

Same thing. It's STaSIS doing what they do best... putting their brand on another company's product. Here's another replica of the same wheel (MRR HR6): http://mrrwheels.com/hr6.html

Thanks for the reply. I'm having a hard time finding the weight of the wheels. Haven't really looked for wheels before. Do the after market wheel manufacturers usually not list the weights on purpose?

[Blake P]

Thanks for the reply. I'm having a hard time finding the weight of the wheels. Haven't really looked for wheels before. Do the after market wheel manufacturers usually not list the weights on purpose?

I know some sites like TireRack do a pretty good job listing wheel weights. Otherwise, many manufacturers won't specifically list weights unless there's something to brag about. A good rule of thumb for 20's would be ~25lbs forged or ~30lbs cast.

[L0U]

or $$$$ forged 23lbs winky. I am soo liking my wheels...I just post whore them everywhere. hehe



OZ HLT 20s are 23 lbs too...but you have to like ultraleggaras.

[Jdaly9056L]

^
Very nice!!

[KonDu]

When I see the STaSIS Wheels, I want to have them...but here in Germany there is no way to get them...

So I look a while and found those beautiful Corniche Monza Wheels..
They are 9x20 with Pirelli PZero Nero 255/30R20. Got some KW V1 InoxLine Coilover and 5mm spacer at the back on each side.

Got 12.8inch at the front [from the middle of the wheels, to the lower border], and at the back 12.99inch...[hope you understand what I mean^^]

Need more pics?

[linet90]

That second picture is sick, the transparent hood.

[Icey]

Should we start a chatterbox thread: Wives, Fiances, GFs Who Want to Have Their A4 Owning Men Committed
Thanks for b'day wishes
Cheers

Great thread idea - my wife rolls her eyes all the time when my car gets mentioned - but she's a good sport. And +1 for 18" wheels...CF5s in 18" on order.

[alfred.g]

who makes the best over all wheel? vmr, forgestar, avant garde?

[Bee_Eight]

Miro 111
19x9.5
ET 40

Tires
Hankook V12
255/35/19

Suspension
ST Coilovers

[Calbee]

^very nice wheels. isit just me or do you have a spoiler?

[alfred.g]

Them miro111 are sick! How do you like them so far? Dam that's one sexy looking whip, well done!