a slight modification to a DIY post i made

[yoogene83]

Hey AZ mod's,

I just looked over my old B6 timing belt DIY guide and noticed that a lot of the wording has become scrambled. I'm assuming this is when the last update hit some of the apostrophe's didn't convert over too well. If any of you guys have the time, mind running through it and cleaning it up? I'd do it except i can't edit the post anymore :(

Also, I just found out that there are 2 different types of tensioner's out there; one with a grenade style pin and another with a flat piece of metal about 2 inches long holding down the pistion that pushes the idler tensioner. Can we make an edit an add the following *edit* under step 13?

*edit
Please note that there are 2 different types of tensioners manufactured. One has the grenade style pin release like shown and the other has a flat piece of metal about 2 inches long holding down the piston that pushes the idler tensioner. Please look at your tensioner and verify which one you have.
/edit

Thanks AZ!

[AvanTTix]

Done. Thanks for keeping up w/ it.