Connects2 Radio Install Interface (Install your radio in MINUTES!)

[CKYmike]

We just completed testing for the Connects2 interface for aftermarket radios into any canbus-equipped audi/vw. This interface is a fully plug and play harness that we can make custom cables to connect to your new aftermarket radio and have it fully functional...install takes minutes.

How it works:
We use the connects2 harness and as many of you know, there is no accessory power behind the radio on many VAG cars. The harness includes a thin business card sized interface that uses canbus signals to get accessory power, reverse signal(for reverse cameras), illumination wire, vehicle speed sense(for gps equipped radios) and parking brake wire. Not to mention we have plugs available so that you can hook it up for steering wheel controls to your radio already programmed!

You will need a radio specific harness that we offer its only 10 dollars extra which allows you to complete your full plug and play setup.

Christian and I just tested the unit out in my A4 with a pioneer D3 harness that we custom made with the Connects2(which we can make for you as well) and it worked phenomenally with the stock Bose system. We had full track up/down, volume up/down, and the mode button on the steering wheel controlled the source right out of the box. A Youtube video will be up shortly on how it works and how easy it is to install.

If you have any questions please let me know, this unit will be the future in aftermarket installs for the VAG-scene.


http://enfigcarstereo.com/shopsite_s..._CTSAD002.html