Front End Mods So Far [pic]

[agkellyboy]

Just the beginning I'm sure, but I think it's a good start. I loved how the euro plate mounted up.



And while I have you here, 15mm all around or 15 front and 20 back?

[Phantom S5]

How'd you go about mounting that europlate? I was planning on doing the same, but I wasn't sure how to approach it. I'd say 15 front 20 back.

[joseaudi]

How'd you go about mounting that europlate? I was planning on doing the same, but I wasn't sure how to approach it. I'd say 15 front 20 back.

I just mounted 15 front and 20 rear on my stock 18" rims! Looks really good now, hated how far in the wheels were before. No rubbing at all, stock height though. I'm really happy with how it turned out.

[A4Ber]

Nice!

[agkellyboy]

How'd you go about mounting that europlate? I was planning on doing the same, but I wasn't sure how to approach it. I'd say 15 front 20 back.

Just some 3M heavy duty mounting tape, use it for all my euro plate mounting needs. It's the grey tape with red backing.

Anyone think 20mm would be a problem with a moderate lowering down the road?

[Phantom S5]

Just some 3M heavy duty mounting tape, use it for all my euro plate mounting needs. It's the grey tape with red backing.

Anyone think 20mm would be a problem with a moderate lowering down the road?

Thanks. I heard there is a way to take off the filler plate though.. I'm going to try and figure it out. Where did you buy your europlate? The Audi dealer was out and all I have is one from my Audi A4 that says "Audi Turbo", so that wouldn't really go with it.

[Blake P]

Do you have the 18" or 19" wheels?

[agkellyboy]

Plate is from europeanplates.com. I just copied the plate used on the promotional cars.

18"s, with 15 and 20mm spacers

[Phantom S5]

Plate is from europeanplates.com. I just copied the plate used on the promotional cars.

18"s, with 15 and 20mm spacers

I'm probably going to order one for my car. I got unlucky, scuffed a wheel in center city lightly, and someone left a light scratch on my rear driver side door at King of Prussia Mall, so as of right now I just want to make my car flawless.. I have the 19" wheels, but I'm not sure if I should get spacers.. I was thinking 19 or 20" BBS wheels with HPs for spring. Where are you by the way? I live in Plymouth Meeting, always driving around the suburbs all over.. I thought I saw you once but I wasn't sure.

[Blake P]

I'm probably going to order one for my car. I got unlucky, scuffed a wheel in center city lightly, and someone left a light scratch on my rear driver side door at King of Prussia Mall, so as of right now I just want to make my car flawless.. I have the 19" wheels, but I'm not sure if I should get spacers.. I was thinking 19 or 20" BBS wheels with HPs for spring. Where are you by the way? I live in Plymouth Meeting, always driving around the suburbs all over.. I thought I saw you once but I wasn't sure.

15mm spacers are too much for the 19" wheels, so I believe 5mm are your only option at this time.

[agkellyboy]

The car's is in Haverford with my pops, the primary driver. I'm in Baltimore at Hopkins, so it's difficult convincing him to stop driving his car and drive mine once in a while!

[1_clean_Audi]

looks good!,glad to see another Az'r round teh are(im in SNJ bout 5 minutes form philly)

[eskimopunk]

Why not get a euro plate holder?