Tri-State Section VAG-COM Owners

**Lazydog** · 09-06-2013 09:38 PM

Anyone in SE PA willing to VAG my '12 A8L? PM me.

Would like to get the
widows up/down with fob
needle sweep
Video in motion
and I read somewhere about getting the break lights to flash when you when doing an emergency breaking.

**rahip4567** · 09-09-2013 04:23 PM

Model : HEX USB+CAN
Software : VCDS Release 11.11.6
Location : Danbury, CT
Contact : Shoot me a PM or email @ [email protected]

**Sour** · 09-10-2013 02:48 PM

In Brooklyn, Prospect Heights, need to clear a service reminder tomorrow or Thursday if possible. Please let me know. Thanks.

**igotonee** · 09-25-2013 08:06 AM

Anyone in Westchester, NY willing to VAG-COM my '04 Audi S4? PM me.

Would like to get the
Remote Windows
Independent Fogs
needle sweep (if possible)
Increase Rear Taillight, Brake Light, and Fog Light Brightness
& any other that could be done.

**Fir$t_TubE** · 09-26-2013 10:37 AM

anyone near Huntington, LI that could help me VAG-COM my '10 Audi S4?
will provide booze or cash.

PM me if you can help a bro out

**gohan** · 09-26-2013 12:19 PM

central NJ, would like:

widows up/down with fob (i really miss this feature!)
needle sweep

PM me.

**Jaymehaze** · 10-05-2013 12:43 PM

Westchester/Putnam ny
Hex+can USB .. Works on my 11 s5

**Just A B8** · 10-09-2013 02:12 PM

Hex-Can-USB

Bergen County / Near the Garden State Plaza Mall

**gohan** · 10-09-2013 02:37 PM

Just a b8. Hook a brother up!

Sent from my SCH-I605 using Tapatalk 4

**Just A B8** · 10-09-2013 03:20 PM

Originally Posted by gohan

Just a b8. Hook a brother up!

Sent from my SCH-I605 using Tapatalk 4

PM coming your way sir. I like the teaser pic of your new wheels.

**sangaroo** · 10-11-2013 05:47 AM

Model : HEX USB+CAN
Software : VCDS Release 11.11.6
Location : Middlebury-Southbury, CT
Contact : PM or 2zero3 five77 74zero5

**wsr1206** · 11-05-2013 02:43 PM

Name: Won
Model: HEX-USB+CAN
Location: Fort Lee, NJ
Contact: PM or Email ([email protected])

**Vinnie981** · 12-13-2013 07:42 PM

Name: Vince
Model: HEX-USB+CAN
Software: Latest version
Location: Bridgewater, NJ
Contact: PM for contact info

**Rollin Thunder** · 04-08-2014 07:27 PM

Name: Doug
Model: HEX-USB+CAN
Software: Latest version
Location: North Brunswick/Franklin Park, NJ
Contact: PM for contact info

**joesperformance** · 12-19-2013 06:45 AM

Name: Joe
Model: HEX-USB+CAN
Location: Marlton, NJ
Contact: PM or Email Joe@joes performance.com

Sent from my SCH-I545 using Tapatalk

**Legacykid** · 12-22-2013 08:28 AM

Anyone near paramus nj, have a CEL i would like to see what it is?

**Toiffel** · 12-25-2013 05:37 PM

Hey guys, doing a halogen to bixenon upgrade, need vag_com Westchester County !!! Schedule for after three weeks or so, waiting on headlights...

**Tomskullz** · 01-20-2014 02:36 PM

Hey guys anyone knows where can I go and how much to do the halogen to bixenon swap on 2011 a4.
Tried searching in forum but no results.
Thanks

**Liquid Smoke** · 01-20-2014 05:09 PM

Originally Posted by Tomskullz

Hey guys anyone knows where can I go and how much to do the halogen to bixenon swap on 2011 a4.
Tried searching in forum but no results.
Thanks

search for "bixenon conversion" and you'll find a big thread on it. OEM swap including the lights, ballasts, wires/adapters, and coding comes to around $1k i believe.

**Tomskullz** · 01-20-2014 07:17 PM

I'm sorry I meant that I have all the required parts .... And was wondering if there's some shop or someone that does the installation and how much.

**Liquid Smoke** · 01-20-2014 07:22 PM

Originally Posted by Tomskullz

I'm sorry I meant that I have all the required parts .... And was wondering if there's some shop or someone that does the installation and how much.

oh i see, well labor shouldnt really be much, not sure if the coding is ready to go you might want to check that thread. but otherwise labor of putting in the lights should be pretty standard, like half hour of work prob. i would just find an independent shop, local audi/vw mechanics that would be familiar with the parts and harnesses and do it right.

**Tomskullz** · 01-20-2014 07:36 PM

Originally Posted by Liquid Smoke

oh i see, well labor shouldnt really be much, not sure if the coding is ready to go you might want to check that thread. but otherwise labor of putting in the lights should be pretty standard, like half hour of work prob. i would just find an independent shop, local audi/vw mechanics that would be familiar with the parts and harnesses and do it right.

Thanks

**Lazydog** · 01-29-2014 05:17 PM

Model: HEX-USB+CAN
Location: Chester County, PA
Contact: Pm

**Toiffel** · 02-07-2014 03:46 AM

@ Tom I'm in Westchester , pm I can help you out with coding.

**gehmjc21** · 02-18-2014 06:35 PM

Anyone in CNY - Rochester / Syracuse? I have a '14 S4 I'm looking to have help with. Thank you!

**Clear2Close** · 02-26-2014 10:06 PM

Should be in this week.
HEX USB+CAN
Suffolk County

Anybody needs help with anything, don't hesitate...

Sent from my SM-N900V using Tapatalk

**MoeMZA** · 03-05-2014 03:01 AM

Anyone in the North Jersey/NYC area that can assist (with compensation, if needed) for a 2010 B8?

VCDS, Teamview, and an internet connection

**Unleaded20T** · 03-09-2014 05:50 PM

Hey guys, im in NNJ and looking for a little help clearing a few airbag codes as well as doing a few mods.

Im in the interserction of 287 and 23, can anyone hook me up?

**Vinnie981** · 03-25-2014 08:34 AM

Originally Posted by Unleaded20T

Hey guys, im in NNJ and looking for a little help clearing a few airbag codes as well as doing a few mods.

Im in the interserction of 287 and 23, can anyone hook me up?

Riverdale NJ?

thats like 40 min from me

**gakirby** · 03-13-2014 08:36 AM

Model : HEX USB+CAN
Software : VCDS latest version
Location : Farmington/West Hartford, CT
Contact : PM

**11cabtop** · 03-16-2014 08:03 AM

Hi guys, I'm looking to enable Audi Drive Select in the MMI so I can select Dynamic mode and effect gear shift points. Anyone in the Bergen County/Paramus/Hackensack area?

Sent from my iPhone using Tapatalk

**Fdny5772** · 03-21-2014 05:32 AM

Model: HEX-USB+CAN
Location: Brooklyn, NY
Contact: Pm
Software: latest VCDS

**iamGHANA** · 04-23-2014 07:10 PM

Originally Posted by Fdny5772

Model: HEX-USB+CAN
Location: Brooklyn, NY
Contact: Pm
Software: latest VCDS

PM sent

Sent from my iPhone using Tapatalk

**MaXaZoR** · 03-26-2014 12:21 PM

Anyone in Jersey City or Bridgewater NJ Area? Have some error code I need to clear out.

**Coney** · 03-29-2014 07:50 AM

Clifton Park NY wondering if someone would be willing to help just want to turn on the aux function on this b7 a4 i just picked up

**DoctorB8** · 04-08-2014 10:57 PM

Name: Tim
Model: HEX-USB+CAN
Software: Latest version
Location: North/Central NJ and NY (from westchester ny to new brunswick nj)
Contact: PM for contact info

**djfrestyl** · 04-16-2014 12:08 PM

Looking for anyone in the Manalapan/Freehold/Marlboro area of NJ with vag-com to do some basic changes (B8). PM me!

**proflatlander15** · 04-16-2014 04:42 PM

Is there anyone in the CT area that would be interested in letting me borrow a VAGCOM for a few minutes? I need to recode my radio so I can install the Aux-In I just purchased. From what I have read it is just changing a single number in one of the codes. I'm new to Audi, so any help would be appreciated. I'll drive to meet you, beer/lunch for your inconvenience.

Thanks!

**Animus** · 04-17-2014 07:37 PM

I'm a new B7 A4, stg III (APR) owner and have access to buying a vag com. I know its for tunning, but how much can i do with this thing? Never really tuned a car before, but i have common sense, electrical engr and this car is a daily driver. I'm looking for some advice on the vag's capability.

**dame drizzo** · 04-19-2014 03:04 PM

I don't know about it having anything to do with tuning, but this is basically a dealer oem quality tool. You can do as much as dealer and then some.

Thread: Tri-State Section VAG-COM Owners

Thread Tools

Display

Hybrid View

Bookmarks

Bookmarks

Posting Permissions