B6 A4 Wheel Thread

[swededA4]

Brand/Name: Privat Werks
Size: 19 X 8.5
Offset: ET33
Spacer(s): 8mm rear
Camber: Unsure
Tires: Rubber
Suspension: Raceland Coilovers
Spring Rates: 700 lbs/inch
Ride height: 23.5 FDG
Fender mods: Rolled
Rubbing: only on my driveway
Brake Spec: HP2's with hawk pads and stock rears for now

[Peacob]

Wheels: LM Reps
Size: 18x8.5F, 18x9.5R w/225/40/18 all around
Offset: 35
Spacers: None yet, might ad 5mm to rear and 3mm to front
Camber: ~ -1.5 in rear and -1.25 front
Tires: Continental Contisport Contact 3 - 225/40/18
Suspension: ST Coilovers
Ride Height: Waiting for springs to settle, and will update
Fender mods: Have yet to be rolled
Rubbing: Front bumper pulling into certain driveways or parking lots

[catchuk]

2004 A4 Ultrasport
1.8 Turbo Quattro
Tires: Pirelli P-Zero Nero All Season-235/40R18 XL (95W)
Offset: 43
Wheel: OEM S-line
Suspension: Stock Ultrasport
Height: Will measure
Spacers: None
Fender Mods: None
Rubbing: none

[Samsonite]

Brand/Name: VMR V718 Hyper Silver
Size: 19x8.5
Offset: ET35 (Final ET 32F, 27R)
Spacer(s): H&R 3mmF, 8mmR
Camber: Stock
Tires: 225/40 ExtremeContact DWS
Suspension: Eibach
Ride height: ~25" FTG
Fender mods: Front screws removed
Rubbing: In rear over very large dips
Brake Spec: Stock 3.0

[John@Roc-Euro]

Brand/Name: Hartmann HTT-256-GA:M (gloss anthracite/machined)
Size: 18x8"
Offset: 32
Spacer(s): nope
Camber: unadjusted
Tires: Cooper RS3-A 245/40 (I think, need to double check)
Suspension: crappy ol' vmaxx
Spring Rates: n/a
Ride height: 25" ftg
Fender mods: bolts, light roll
Rubbing: nope, none yet at least
Brake Spec: stock

( helpful search term stuff: 18" TTRS Reps TT-RS )







It's my moms ride.. haha

[chadski]

NEWBIE

Brand/Name: VMR RS4 Reps
Size: 19"x8.5"
Spacers: None yet..
Tires: 235/40/R19
Suspension: Eibach Pro Springs | Stock struts
Fender mods: None
Rubbing: No
Brake Spec: Stock...unfortunately
Last car wash: Last Night



After I Painted the Wheels:

[Joey0918]

Brand/Name: OEM B6 A4 USP
Size: 18"x8"
Offset: +43, with spacers Final ET Front +33, Rear +31.5
Spacers: +10 in the front, 12.5 Rear
Tires: 235/40/R18
Suspension: Tein Springs
Fender mods: No Top Screw
Rubbing: No
Brake Spec: Stock







Brand/Name: VMR RS4 Reps
Size: 19"x8.5"
Offset: +35
Spacers: No..
Tires: 235/40/R19
Suspension: 1st picture Tein Springs, Second picture ST coils
Fender mods: No Liners
Rubbing: Some at full lock
Brake Spec: Stock







My current Setup

Brand/Name: OEM Chrome Mercedes Alpahrds
Size: Rear 18"x9.5" Front 18"x8.5"
Offset: +40 Rear, +35 Front. With the spacers the Final ET Front +25 Rear +28.5
Spacers: +10 in the front, 12.5 Rear
Tires: Front: 215/35/R18 Rear: 225/40/R18
Suspension: ST Coils
Fender mods: No Liners
Rubbing: No
Brake Spec: Stock

[tchuck]

Brand/Name: Audi S5
Size: 19x8.5
Offset: et32
Spacer(s): none
Camber: within spec
Tires: 245/35R19 Goodyear Eagle F1
Suspension: BC Racing coilovers
Spring Rates: 10kg/mm front and rear
Ride height: 24.75" FTG
Fender mods: Rolled fronts, front liner fastener removed.
Rubbing: NONE! (finally)
Brake Spec: stock calipers

[bbwim]

Brand/Name: MSW Type 11
Size: 17" x 8.5"
Offset: +35mm
Spacer(s): none
Camber: No
Tires: 225/45-17 Blizzak Snow (getting all-seasons soon)
Suspension: Stock
Spring Rates:
Ride height: Stock
Fender mods: No
Rubbing: No
Brake Spec: stock calipers

[williams91]

Brand/Name: bbs lm-r replica
Size: 18x9
Offset: 38
Spacer(s): none
Camber: 1.5 degres
Tires: 225-40-18
Suspension: sport package shock, neuspeed race spring
Ride height: ???
Fender mods: nothing
Rubbing: never
Brake Spec: oem

[Staz]

GENUINE BBS CH 18X8 ET50 - was running a 25mm spacer to bring it down to ET25 - 225/40/18 all around





ROUND 2 OF GENUINE BBS CH 18X8.5 ET35 - believe this included a 5mm to drop it down to a ET30 - 225/40/18 all around





OEM RS4 19X9 ET29 - no spacer - 225/35/19 front 235/35/19 rear - rear fender liner was removed - 225/35/19 in rear wouldve been perfect





OZ SUPERTURISMO LM - 19X8.5 - 19X9.5 235/35/19 all around iirc



SL500 STAGGERED - 18x8.5 et35 / 9.5 et40- no spacer - 235/40/18 blizzacks





ENKEI NT03 - 18x9.5 ET27 - needed 5MM to clear BBK - dropping it down to ET22 - 225/40/18 all around

[krew53]

Brand/Name: HRE 546R
Size: 19x8.5
Offset: 38
Spacer(s): none
Tires: 235/35/19
Suspension: Koni Coilovers
Ride height: Low
Fender mods: Rolled
Rubbing: On hard cornering
Brake Spec: B7 RS4 Brembo

[krew53]

Brand/Name: Sportec Mono 10
Size: 19x8.5
Offset: 35
Spacer(s): none
Tires: 235/35/19
Suspension: Koni Coilovers
Ride height: Low
Fender mods: Rolled
Rubbing: On hard cornering
Brake Spec: B7 RS4 Brembo

[willisan]

Brand/Name:OEM
Offset: Stock
Spacers: Not yet
Camber: Stock
Tires: Diagonal pointy ones like this <<<< >>>>
Suspension: Sport

[jubei4769]

Brand/Name: Privat Akzents
Size:18x8.5
Offset: ET32 front, ET32 rears
Spacer(s): none
Camber:
Tires: Falken 453's 225/40/18
Suspension: Stasis Koni Sports
Spring Rates:
Ride height: 24 1/4"
Fender mods: front fender screw removed
Rubbing:
Brake Spec: stock

[1CleanB6]

Brand/Name: Unknown BBS LM Replicas
Size: 19x8.5 fr 19x9.5 rear
Offset: ET 35fr ET38 rear
Spacers: 10mm fr, 5mm rear
Camber: None
Tires: Nexen N3000 235/35/19
Suspension: St Coilovers
Fender Mods: None yet going to remove fender screws.





Sent from my SGH-M919 using Tapatalk 4 Beta

[mauromj]

Wheels: BBS LM Rep's
Size: 19x8.5
Offset: 35mm
Camber: Maybe a little? Haven't had an alignment.
Tires: Nexen N3000 235/35/19
Suspension: St Coils
Fender Mods: Rolled fronts
Rubbing?: On front outer fender lip during bumpy turns.

[AvanTTix]

As a reminder to anyone posting in this thread:

Chit chat is not allowed. This thread is only about wheels set-up on the B6 platform.

Please contact member(s) via PM if you have any questions about their set-up and ask them to update the specs as needed.

This is the format we would like you to follow:

Format
Brand/Name:
Size:
Offset:
Spacer(s):
Camber:
Tires:
Suspension:
Spring Rates:
Ride height:
Fender mods:
Rubbing:
Brake Spec:

Also if your pics are no longer visible your post will be removed.

TIA!

[EURO_DOLL]

Brand/Name: OEM Mercedes AMG monoblocks
Size: 18x8.5
Offset: ET44 (Final ET34 with spacers)
Spacer(s): H&R Trak+ 10mm spacers
Camber: Nothing crazy.
Tires: Nankang NS-2020 215/40/18 with baby stretch.
Suspension: ST Coilovers
Spring Rates: Whatever the rates of the ST springs are.
Ride height: Low.
Fender mods: None.
Rubbing: On hills, slopes, and when turning the front wheels sharply.
Brake Spec: OEM fronts. Ceramic Akebonos rears.







Sorry for the crappy picture quality.

[rich045]

Brand/Name: RS6 Reps
Size: 18x8.5
Offset: +35
Spacer(s): NO
Camber: no
Tires: 235/40/18
Suspension: D2 coilovers (came with car, waiting for them to blow, LOL)
Spring Rates: whatever D2's come with
Ride height: low
Fender mods: when i bought the car, it didnt have fender liners =(
Rubbing: only when fat people sit on the back driver side
Brake Spec: stock

[skunk2uned]

Brand/Name: BBS LM Reps
Size: 19x8.5
Spacer(s): N/A
Camber: No Correction
Tires: 225/35/19
Suspension: Bilstein Sport Shocks w/Tein S Tech Springs
Fender mods: None
Rubbing: None
Brake Spec: OEM

[ECS Tuning-Audi]

Alzor Style 881's

18X9.5 front and rear

235/40/18 tires used in the picture but 225 would be better for daily driving as the 235 is subject to rubbing up front.

FK suspension



Jason

[Hot Wheels]

Brand/Name: iForged Essen, powdercoated Candy Grape Lollipop
Size: 19 x 8.5"
Spacers: 15mm all around
No Camber
Tires: 215/35/19
Suspension: ST Coilovers
Fender Mods: Rolled
Rubbing: minimal in rear
Brake Spec: OEM

[tehbry]

I've wanted wheels for quite some time, please don't hate on the terrible instagram pictures...

Brand/Name: JE Design (bought them fairly beat; sand blasted, fixed curb damage, plasti dipped - ballin' on a budget)
Size: 19x8.0
Offset:
Spacers: None... yet
Camber: None
Tires: Bridgestone Potenza 225/40/19
Suspension: Audi Sport to hold me over until coilovers
Fender Mods: None
Brake Spec: B7 A4 front, soon to be B7 S4

[Edens617]

Size:
RS4 Style Rep Wheels - 18x8
Offset: 35.0
Spacers: None... yet
Camber: None
Tires: Perelli Pzero Nero P235/40/18
Suspension: Stock for now
Fender Mods: None
Brake Spec: Stock

[MNAudi101]

Brand/Name: Peeler reps
Size: 18x8
Offset: ET45 final offsets ET30
Spacer(s): 15mm front, 15 mm rear
Camber: slight negative
Tires: Kumho Ecsta ASX 245/40/18
Suspension: Eibach pro
Ride height: need to measure
Fender mods: fender liner screw pulled
Rubbing: only on large dips
Brake Spec: HP2's with a slight shave

[CDN_S4]

Brand/Name: BBS LM Reps by GTS Performance
Size: 19x8.5
Offset: ET35
Spacer(s): 10 mm front, 10 mm rear
Camber:
Tires: Nexen All Season - 225/35/19
Suspension: H&amp;R springs, stock S4 shocks
Ride height: not sure
Fender mods: fender liner screw pulled
Rubbing: never
Brake Spec: Stock S4














Sent from my iPhone using Tapatalk

[bballcurt43]

Brand/Name: VCT V-one black
Size: 18x8
Offset: ET35
Spacer(s): none
Camber:
Tires: 235/40r18w
Suspension: Neuspeed Race Springs and Koni Yellow Struts/Shocks
Spring Rates:
Ride height:
Fender mods: none yet
Rubbing: on large bumps and when wheel is turned all the way
Brake Spec: oem

[IMG][/IMG]

[thatoneguy...]

Brand: Sparco Asetto Gara
Size: 17x7.5
Spacers: None
Camber: Stock
Suspension: Eibach Sport Springs, Sport package shocks
Fender mods: None
Rubbing: None
Brakes: Stock


These things are really light. Makes the car feel a heck of a lot faster!

[Tom Marius]

Brand/Name: Larson SLR reps
Size:18x8.5 fronts. 18x9.5 Rears
Offset: ET 35
Spacer(s): 11 up front, ET24 final
Camber: -2,5 front. -3 rear
Tires: Front: Nankang ns20 205/35 Rear: Nankang ns2 215/35
Suspension: Supersport Black evolution With Ksport front springs for M3 at the rear.
Spring Rates: stiff
Ride height: Quite low
Fender mods: Removed screws from front fender.
Rubbing: No rubbing, it scrapes though.
Brake Spec: EBC USR Discs and EBC Greenstuff pads



Brand/Name: Rotiform NUE
Size:18x9.5
Offset: ET 35
Spacer(s):
Camber: -2,5 front. -3 rear
Tires: Nankang ns2 225/40
Suspension: Supersport Black evolution With Ksport front springs for M3 at the rear.
Spring Rates: stiff
Ride height: Quite low
Fender mods: Removed screws from front fender.
Rubbing: If you aint rubbin, you aint dubbin
Brake Spec: EBC USR Discs and EBC Greenstuff pads



Brand/Name: Rotiform NUE
Size:18x9.5
Offset: ET 35
Spacer(s):
Camber: -2,5 front. -3 rear
Tires: Nankang ns2 225/35
Suspension: Supersport Black evolution With Ksport front springs for M3 at the rear.
Spring Rates: stiff
Ride height: Quite low
Fender mods: Removed screws from front fender.
Rubbing: Rubbing is for cute little boys. Spark it, or park it
Brake Spec: EBC USR Discs and EBC Greenstuff pads





I guess this is why it scrapes..

[Krisavant]

Format
Brand/Name: Audi A5 Alloys
Size: 18 x 8.5
Offset: 29
Spacer(s): none
Camber: normal
Tires: 225/40/18
Suspension: B5 Perches on USP setup
Fender mods: Front fender screw removed
Rubbing: Not now on 225's but will on 235's
Brake Spec: Standard

[Will_Noel]

Brand/Name: Koya Ispiri ISR7A
Size: 20" x 8.5"
Offset: 45
Spacer(s): None
Camber:
Tires: 245/30/20
Suspension: Stock
Spring Rates: Stock
Ride height: Stock
Fender mods: Rolled
Rubbing: None after rolling
Brake Spec: Stock, with some upgrades to come






Sent from my iPad using Tapatalk - now Free

[MNAudi101]

Brand/Name: OEM B8 S4 (Peelers)
Size: 19x8.5
Offset: 43
Spacer(s): 5mm front 10mm rear, final offset ET38 front ET33 rear
Camber: slight negative
Tires: Continental Sport Contact 3 235/35/19
Suspension: FK Coilovers
Spring Rates: Whatever came with FK
Ride height: Need to lower the front a slight more 25 rear, 24.75 front
Fender mods: Fender screw cut out from last wheels
Rubbing: Nope
Brake Spec: HP2s

**Sorry for shitty iPhone pictures

[Eurofication]

Brand/Name: VMR V701
Size: 19x8.5
Offset: 35
Spacer(s): 5mm front 5mm rear, final offset ET30 front ET30 rear
Camber: slight negative
Tires: Nexxen N7000 225/35/19
Suspension: ST Coilovers
Spring Rates: Whatever came with ST
Ride height: FTG front 24.25 Front, 24.75 Rear
Fender mods: Fender screw removed
Rubbing: Nope
Brake Spec: Stock, HP2's in near future

[lqh9369]

Format
Brand/Name: Audi A4 AVANT
Spacer(s): none
Tires: 235-40-18
WHEELS:BBS RC 306 ET32 18*8.5J

[lqh9369]

[Waspjr]

Lowering spring with 19" audi turbines and 35 z's no rubs


Sent from my iPhone using Tapatalk

[Militant-Grunt]

Brand/Name: 7 Spoke Mercedes Oem wheels
Size: 17x8.5
Offset: 35
Spacer(s): None
Camber: -1.75
Tires: 225/45
Suspension: H&R sport lowering springs
Ride height: Sports drop
Fender mods: None
Rubbing: None
Brake Spec: 332 Stop Techs. / B6 S4 300mm rear

[Icedtc]

Brand/Name: Velocity Motor Racing V708 - Gun-metal
Size: 18 x 8.5
Offset: 35mm
Spacer(s): N/A
Camber: N/A
Tires: Continental Extreme Contact DWS 235/40/18
Suspension: ST Coil-Overs
Spring Rates: N/A
Ride height: Finger gap from tires to wheel well
Fender mods: None
Rubbing: Slight scraping over big bumps in rear - will adjust height up about 0.5 inches
Brake Spec: Stock

With all of the snow NJ got hit with I was really glad I just got these rims/tires put on Monday! I was able to drive around like a champ. I am loving the look of Velocity Motor's rims and recommend them highly (my cat loves them too) haha.

[1.8Turbo4me!]

Format
Brand/Name: OEM S-Line Wheels
Size: 18x8
Offset: OEM - 43
Spacer(s): none
Camber:
Tires: Michelin Pilot Alpin PA2 - 235/40/18
Suspension: H & R Sport w/ Bilstein Sport Shocks
Spring Rates:
Ride height: ~25" gtf
Fender mods: None
Rubbing: Speed bumps on rear if too much weight/people
Brake Spec: Crappy OEM


Format
Brand/Name: VMR v710 - Gunmetal
Size: 18x8.5
Offset: 35
Spacer(s): none
Camber:
Tires: Continental DWS - 235/40/18
Suspension: H & R Sport w/ Bilstein Sport Shocks
Spring Rates:
Ride height: ~25" gtf
Fender mods: None
Rubbing: Speed bumps on rear if too much weight/people
Brake Spec: B7 S4 Front Brakes


Format
Brand/Name: OZ Ultraleggera - Painted Triple Bronze (center caps are coming)
Size: 18x8
Offset: 35
Spacer(s): 9mm (Converted to 034 Motorsport 2.5" Stud & Ball Seat Nut Kit)
Camber:
Tires: Hankook Ventus v12 Evo 225/40/18
Suspension: H & R Sport w/ Bilstein Sport Shocks
Spring Rates:
Ride height: ~25" gtf
Fender mods: None
Rubbing:
Brake Spec: B7 S4 Front Brakes / B6 S4 Rear Brakes