B6 A4 Wheel Thread

[Steve Bassen]

Alzor 654's (19x8.5 ET42) with MPS4S 255/35-19's... Bilstein coils lowered about 3/4". Front needed 5mm spacer to clear the Q5 4pots and I think it would have rubbed the upright without the spacer, as well. Rear no spacer (would have been too close to the fender arch for comfort).

[wafi ahmed]

IMG_3195.jpg
18x9.5 et35
245/40/18
On coilovers
No spacers
No rolling
Rubs only when hits bump


Sent from my iPhone using Audizine Forum

[Mickroy]

signal-2022-12-10-181004_006.jpgsignal-2022-12-10-181004_005.jpg

XXR 527 in 18x8.75 +40.
235/40/18
Lowered with Bilstein struts & Eibach springs.
Only brake upgrade is RDA slotted rotors.
No spacers or rubbing.

[Evan1028]

Bump?

[Evan1028]

I need to get pictures on my next detail LOL

[1.8TFan]

Finally got my rims...





It's dirty and dusty but I wanted to get a few shots anyway. Wheel details:

VMR V710 19"x 8.5" ET35 with 235/35/R19 tires. No spacers, no drop, no rubbing. It's getting dropped soon, still have some other bugs to work out first, ABS light woes. Did get the new one piece S4 outer tie rods and stock inners swapped out. New alignment and it feels way better.

[Evan1028]

Nice looking combo, black and red look great together!

[Evan1028]

Well I am finally getting some pictures uploaded, here you go! 18" Stock B7 S-Line Wheels.

[1.8TFan]

Appreciate it, yeah I like the look too. Your B7 wheels look good too, clean.

[Evan1028]

Appreciate it, yeah I like the look too. Your B7 wheels look good too, clean.

thanks mate

[Reginka]

Well I am finally getting some pictures uploaded, here you go! 18" Stock B7 S-Line Wheels.

In my opinion, this tire is the best fit for your car.

[Gunnarrrrr]

past and present

19x10 et35 rotiform spf wrapped in 275/30 hankooks.

heavily rolled and pulled fenders, rears totally flared out. no rubbing at this height.



currently on 18x8.5 b8.5 A5 wheels, et29.
scrapped the old fenders for new ones, and gave these a full roll and almost no pull. needs 10-15mm spacers out back to fill the gap left from the old setup. wrapped in the oem 245/40 bridgestones. ditched the BC coilovers for tein springs.




Sent from my District Green iPhone 13 Pro using Audizine Forum

[Nirvana09]

IMG_20231215_125627_MP.jpg

Mercedes 190 Gullideckel rims, 225/75R15 tires, Porsche studs.

With my lift everything fits perfect. About nine inches of ground clearance. Where I live I need every inch I can get.

[driveway]

Squeezed some AMG monoblocks in from '98 SL500. A little too much rubber but i kinda like it. Rubs a smidge occasionally. Stock sport suspension on the 1.8 6spd with USP bits at painter.

Wanted to try but not sure If I'm keeping.

[canonball]

Squeezed some AMG monoblocks in from '98 SL500. A little too much rubber but i kinda like it. Rubs a smidge occasionally. Stock sport suspension on the 1.8 6spd with USP bits at painter.

Wanted to try but not sure If I'm keeping.

This looks awesome!

[Stock B6]

Brand/Name: VW Savannah (Tiguan R-Line wheels)
Size: 19x9
Offset: +33
Spacer(s): N/A
Camber: -1.5ish all around
Tires: Michelin PSS 235/35R19
Suspension: B6 S4 Shocks, Tein S.Tech Lowering Springs
Spring Rates: Still don't know
Ride height: 25" FTG
Fender mods: Fender liner screw removed
Rubbing: meh not really
Brake Spec: B8 S4 front calipers and B7 S4 rear calipers, R1 slotted rotors



OEM 19x9's are peak for this chassis imo, whether it be S5 Peelers, B7 RS4 wheels, Speedlines, etc.

[Gunnarrrrr]

nice.

I’ve been big on OEM 18x8.5’s lately. All the A5 versions are ET29. about to grab a b9.5 set to replace the b8.5 ones i’m running now.


Sent from my iPhone using Audizine Forum

[Danisson]

Brand/Name: SSM (Audi 4E0601025) OEM UltraSport Alloys
Size: 18"x 8J
Offset: 43
Tires: Continental "SportContact 6" (DOT 0723)

Noticed these are somewhat lighter than the 17" of the same model... guess the lower tire profile and the Si7 alloy helps :) Car feels great ! Man o man, these are so hard to find around here... now that 1 year of searching and dreaming finally pays off !

[Mike Tries]

Those wheels look great! I like the "Turbo" logo on the back, too. Nice, clean look.

Also, that's kind of a cool old-looking building there. What is--or was it?

[Danisson]

Those wheels look great! I like the "Turbo" logo on the back, too. Nice, clean look.

Also, that's kind of a cool old-looking building there. What is--or was it?

Thanks a lot ! The city itself was a very important industrial pin on the map back in the 80s... this specific building used to be a marine engines factory, making giant piston rods, crankshafts and gears.

[Mike Tries]

It's fun to imagine what it looked like in 1985. Those windows look like they might have all been different colors when seen from the outside.

[alleykat]

I want to put nice wheels on mine but I also don't want to pay more for wheels than I did for the whole car.

[awk17]

I know this is old but I’m looking to get a set of B9 RS5 19x8 10 spokes et26. I see others throwing RS4 19x9 et29 on these cars and I’m wondering how my clearance is going to be? I’m not running spacers and I have koni shocks with h&r springs. Will these be able to tuck enough or will I be rubbing?

[Gunnarrrrr]

I know this is old but I’m looking to get a set of B9 RS5 19x8 10 spokes et26. I see others throwing RS4 19x9 et29 on these cars and I’m wondering how my clearance is going to be? I’m not running spacers and I have koni shocks with h&r springs. Will these be able to tuck enough or will I be rubbing?

with 235’s and a roll on the front you’ll be ok. 35 max. if you can get 225’s on that’s a safer bet.


Sent from my iPhone using Audizine Forum