headlight question

[Borden]

I was taking apartmy headlights today and when i was getting one of the top bolts out it snapped So i had to drill out the old bolt..and that failed so now i need a new metal sleve? where do i get one or is it part of that upper bar(radiator support)

thanks for the help

[Borden]

no ideas anyone?? or ideas on how to go about finding out what part it is??

[k0mpresd]

does the bolt screw in to a speed nut? i think it does but i cant remember off the top of my head. if so, part # n 901 686 04 will probably work.

[Borden]

ummm yea i believe so..how do you get it out? does it unscrew or am i gonna have to dremel it out...either way zip ties do an ok job of holding a headlight in

[LDetter]

I accidently cross threaded my headlight bolt in and it got so tight that the metal sleeve turned right out of the plastic radiator support. There was just a big hole where it was so what i did was found a nut that had the same threads of the headlight screw and put it under the lip of the rad support then screwed the screw in. You cant even tell that anythings wrong, it just makes it a little more of a pain when getting the headlights out but i deal with it.

[k0mpresd]

yea. now that i think about it more it is one of those threaded sleeves. i couldnt remember exactly. i looked in etka but didnt see it listed separately. it may be but its been so long since i used etka on a day to day basis i cant find items like i used to.