Cargo Partition

[Grig85]

Hi all, I did some searching around but couldnt find any usefull info. this is one of the dumbes questions but I need some help.
I got me an Allroad cargo Partition for my C5 Avant, and it seems simplest thing to add just plug in, but I doesnt want to go in all the way
is there something wrong I am doing here??

[lookaught]

I don't understand the problem... post a pic or two and maybe someone can help.

In the past I've run into an issue on a MB ML500 where the cargo partition from an older ML320 did not fit... the bar was too wide. I assume that MB narrowed the top of the inside of the car along the way for air ducts or something. The point is that just because the Allroad and C5 avants are similar that does not mean that the partition is interchangable... but I have no way to confirm.

[lookaught]

And better yet post the dimensions of the bar and see if someone with a real C5 partition can confirm that they are correct.

[Grig85]

legth is same it lines up with tabs, but it doesnt want to slide into those tabs. I dont want to force it in too hard because is -20C outside and plastics crack very quick in that weather. but I will snap some pics tonight anyways

[doobiesdaddy]

C5 avant partition is different than C5 allroad partition and thus is not interchangeable.

[Grig85]

even if they are different I still doubt they are not interchangeable. I am thinking maybe sliders that bolt to the seat are different. I looked at the partition and it lines up with mounts on seats perfectly and it kinda goes half way in, but not all the way. gotta call audi tomorrow and check for those sliders.