AMB block

[Dubbster]

the metal tube where the dipstick funnel goes on...theres a stripped threaded fitting ........

the 1.8t engine that i bought from specialized german recycling just has the metal tube but no fitting ....the fitting looks pressed...so the dipstick funnel wont fit....someone help...the engine that i bought is in the 03 a4 ...running is running fine...no codes when we scanned the ecu


need help

[diagnosticator]

You need to describe your problem with more detail, it's not clear what the situation is here, that you need help with. Pics would help a lot.

[dirtybrd]

It's fine, that tube is for the dipstick tube to press onto.

[Wizard-of-OD]

Tap out the sleeve from inside the crankcase and insert your own.They are the same across the board from 1999 onward.

[whiteUSPflow]

ya you just have to push the orange dip stick tube onto the metal tube. it has a fitting that seals it on there. just oder both parts (the sleave that your talking about, and the dip stick) of the dip stick when you do.