*** NEW : 2.5" Turbo inlet silicone hose for 3" MAF - INTRO OF $180US SHIPPED ***

[Wizard-of-OD]

Turbo Inlet Hose, 2.5" Silicone, Longitudinal 1.8T w/ TT225 MAF
Designed as a high performance replacement for the longitudinal 1.8T with GTRS/GT2871R Eliminator turbo, and 2.75" ID TT225/VR6 MAF housing. Constructed from high quality, automotive grade silicone using 4-layers of reinforced nylon - this hose will not collapse under extreme vacuum.

The intake hose is 3" at the MAF and 2.5" at the turbo inlet, and features provisions for all factory DV, PCV, vacuum lines. Perfect fit with the TT225 MAF housing inside the factory airbox, or any aftermarket air intake.

This hose, along with the 2.5" compressor inlet upgrade, is crucial when attempting to make over 240WHP.

2.5" compressor inlet adapter for the GTRS/GT2871R turbo kits sold separately .

Similar products sell on the market for OVER $300US.

INTRO PRICE = 180US SHIPPED in the lower 48 for the first 15 people.
(add 38US for the GTRS adapter)

[A4ringedONE8T]

Very nice This should help out those that are awaiting David and Greg's new 3" MAF/3 bar MAP sensor fueling setup

[HIERLEVELZ]

I wish this was available before I had my custom TIP made. Oh well maybe next time.

[FourRings80]

PM sent! Awesome prices Issam .

[HIERLEVELZ]

It will help all the Unitronics folks thats for sure. I'm suprised someone hadn't manufactured one alot sooner.

[Wizard-of-OD]

All PM's replied.

[Siggiepop]

Pm-ed

[LampyB]

PM Sent

[Wizard-of-OD]

Thanks alot for all those who are supporting us !

[F16HTON]

What about the standard MAF?

[A4 KiDD 810]

please pm if this fits a k03

[Wizard-of-OD]

please pm if this fits a k03

Wont fit a K03.Not without an adapter.

[A4ringedONE8T]

What about the standard MAF?

Issam could include a 1" long piece of 2.75" silicone, slide the silicone on the MAF, and then inside the TIP. The silicone piece will take up the 1/4"

I did this with the 3" TIP I made for my GTRS in order to use the stock MAF and it worked fine

[Wizard-of-OD]

All PM's replied to.
If you do not get a reply in a timely fashion and want an ASAP response simply call me & I will try my best to help you out.

PM us for Unitronic package deals!!

[LampyB]

Hey issam you never got back to me on the TIP velocity adapter. Do you have them or what?

[romell]

can i use this on a 71r elim kit with the 3 inch maf???

[Wizard-of-OD]

Hey issam you never got back to me on the TIP velocity adapter. Do you have them or what?

Called you this morning!
contact me asap!

can i use this on a 71r elim kit with the 3 inch maf???

Yes

[Wizard-of-OD]

All PM's replied to
Thanks for the awesome support everyone.We are working on some new pieces for 2009 that will really make you salivate

[gtsingh91]

Issam could include a 1" long piece of 2.75" silicone, slide the silicone on the MAF, and then inside the TIP. The silicone piece will take up the 1/4"

I did this with the 3" TIP I made for my GTRS in order to use the stock MAF and it worked fine

is that your stock cat? if so what did you use to cover it?

[Wizard-of-OD]

Looks like exhuast wrap to me.

[gq9]

Looks like exhuast wrap to me.

As well as a test pipe.

[Alphazuzu]

Do you offer any TIP's that are 3" throughout. I have the 3" GTRS adapter and only one company seems to make the TIP for a 3" MAF and 3" inlet.

[Alphazuzu]

Still offering the introductory price

[Wizard-of-OD]

Do you offer any TIP's that are 3" throughout. I have the 3" GTRS adapter and only one company seems to make the TIP for a 3" MAF and 3" inlet.

The only 3" tip we offer throughout if for the Audi S4 AAN motor.You can try using it but let me know what compressor housing you are using via PM and maybe we can work something out for you.

[Wizard-of-OD]

All PM's replied to.

[KPC1.8TQuat]

Is this the same TIP you include in your k04 package? If this fits a k03/k04 I'll take one today.

We are finally ready to release our kits in stages!

STAGE I - 180WHP
This is the beginner kit for someone looking to take there stock K03 turbocharger and use it as a boat anchor or other extra circular activities.This is a perfect no-compromise solution for any B5/B6 1.8T owner looking to get more power out of their vehicles while maintaining stock-like spool characteristics.

KIT INCLUDES:
* KKK K04 Turbo, which is designed to be a direct bolt-on upgrade for all longitudinally mounted 1.8T (150/180) equipped vehicles featuring a 0.5mm larger diameter shaft.
* 034 Motorsport High-Flow Stock Location Exhaust Manifold
* K04 Locking Tab & Bolts
* Exhaust Manifold Gasket
* Manifold to Turbo Gasket
* Turbo to Downpipe Gasket
* 034 Motorsport silicone inlet pipe

PRICE = 1259.99US

[Wizard-of-OD]

Is this the same TIP you include in your k04 package? If this fits a k03/k04 I'll take one today.

It is similar,
what we do is include an adapter to allow you to use the tip on the K04 compressor housing.

[Wizard-of-OD]

All PM's REPLIED TO.
Thanks for the support as always!

[mrbacardi35]

Do you make this for the 02-03 year since they dont have the extra connection right off the maf?

[Wizard-of-OD]

Do you make this for the 02-03 year since they dont have the extra connection right off the maf?

This will fit all 1.8T longitudinal motors even the AEB's so you should be fine getting the appropriate connections to work.

[mrbacardi35]

so that means i have to plug the connection right off the maf then right?

This will fit all 1.8T longitudinal motors even the AEB's so you should be fine getting the appropriate connections to work.

[Wizard-of-OD]

so that means i have to plug the connection right off the maf then right?

Yes

[alexza4]

very nice product

[Wizard-of-OD]

very nice product

Thanks You

[doublezero30]

PMing now.

edit-shit just realized this is from january....still $180?

[Wizard-of-OD]

Yes
should I make a new thread?

[Wet0willy01]

Dan[FN]Shank210's pic on his 71r. He put the stock airbox back on so maybe he could get you some current pics

http://www.audizine.com/forum/showthread.php?t=312012

Mine is still sitting in the box with my 71r so I'm no help

[Wizard-of-OD]

hmm fitment is difficult as hell... at least for me i pmed him thanks

What issues are you having? PM me

[Wizard-of-OD]

All PM's replied to