CAD/solidworks file for a 2.8 manual trans?

[Castor Troy]

A buddy of mine (mechanical engineer) and I are attempting something a little different, that's never really been done before. It would be of great assistance if somebody had a a CAD file for the 2.8 5spd trans already made that I could use (specifically that my buddy can use).

I'd prefer not to go into detail about the project atm, but if somebody has what I need, I'd gladly tell them about what I'm doing.

Reason for keeping it private, ftm, is I've seen too many people on too many forums go "zomg lol i'm going to do this and it'll be epic" and then everybody laughs them off the forum because they know that 99% of the time it never happens; and then it doesnt happen. I fully intend to complete this project, and there will be a lot of pics, etc to go with it. Just want to keep it to myself for the time being.

Any help is greatly appreciated!

[ghost6303]

i would also be interested in such a file, not for anything specific but to add to my collection of random crap. ive been amassing quite a collection of solidworks files but unfortunately dont have any Audi files yet. if someone would like to share i could hook you up with some hosting....

[Bic-Ball]

i'll take two for no apparent reason also

[AudiA4_20T]

the internals or the case?

Im pretty sure not a single person on here is going to have a CAD drawing of a 2.8 trans

[Castor Troy]

Case

I need it to design an adapter plate.

[AsianA408]

i have a bottom end i think...... im not sure its in step file format. SW2007 and 08 should decode it. how ever i need to find it. its a 2.8q TIP engine and tranny.

[Castor Troy]

all i need is the bellhousing diameter/bolt pattern info; i guess whether it's an auto or manual doesnt matter.

AsianA408, if thats what you've got I'll take it :D

[flynnr]

i could make one for you : ) im in ME at u of wisc and use solidworks. alls i need is money to buy the trans, and i can use this as my end of the year project :) haha perfect! (would be completed by may 2009

[pac1085]

LS1 to 01A/01E huh?

[317ssayzarc]

LS1 to 01A/01E huh?

Been done

[pac1085]

yeah I know of at least one guy that did it. honestly i wouldn't mind it myself since i wouldn't need to go with standalone, and could pass the new york obd2 emissions inspection :) it would be kind of lame without the t56 though.

[Castor Troy]

nope. not the plan :)

[Bic-Ball]

this needs to be bumped cause the man's got something cool in the works

[AudiA4_20T]

you just need a bellhousing CAD drawing? i might be able to whip one up

[Castor Troy]

correct

[AudiA4_20T]

hmmm, I would ask JHM if they have anything... all of the bellhousings audi makes are basically the same

[California Jay]

A Cosworth 2.3 16v (mid 80's block) to an Audi is one that I've thought of doing many a time. You need to find someone with a FaroArm ;)

[ModifiedA4]

"bellhousing diameter/bolt pattern info"

just buy a rear main seal?

[Matt@JHM]

hmmm, I would ask JHM if they have anything... all of the bellhousings audi makes are basically the same

We make it first, then draw it up.

But no sorry, we don't.