Street or track mounts???

**maclem8223** · 01-02-2009 01:17 PM

First off for those of you with track mounts how much vibration over stock. Are they really that bad or ok for a daily driver? Also; Is there a do it yourself for
Motor mounts

**Maverick** · 01-02-2009 01:21 PM

you use street mounts, track mounts are too stiff for street driving.

I will let some expert to chime in to give you a few tricks to replace the engine mounts.
you can pm 400HPA4

**F16HTON** · 01-02-2009 01:22 PM

If you want to do it now, you will have to go with the Track as the Street are back ordered.

There should be a DIY writeup, it is a very easy mod.

The track are noticably stiffer than the street, vibration is objective, depends on the person.

**maclem8223** · 01-02-2009 01:26 PM

Ok, 034's site says the streets are back in stock...No?

**Murre** · 01-02-2009 01:32 PM

Street are back ordered

Why ?

**s42k5b** · 01-02-2009 01:54 PM

It's all preference. Are you going to mind a little vibration? I would go with track density, You will notice more of a diffrence

**maclem8223** · 01-02-2009 02:01 PM

"a little vibration" no I wouldn't mind I just didn't want something crazy.

**maclem8223** · 01-02-2009 02:12 PM

Street mounts are back in stock; I just confirmed it with 034.

**Papachristou** · 01-02-2009 03:27 PM

i got street engine and track tranny, very happy, just right IMO

**dirtybrd** · 01-02-2009 04:22 PM

I have streets motor and track trans. I had no vibs before installing the trans. mount which I did a few months after the motor mounts. I say street all the way.