Audizine - An Automotive Enthusiast Community

Results 1 to 2 of 2
  1. #1
    Established Member Two Rings
    Join Date
    Dec 08 2008
    AZ Member #
    36128
    Location
    Carson City, NV

    Replacing Rack boots with TRE replacement - B6

    Guest-only advertisement. Register or Log In now!
    When you go to install the inner clamp on a new boot can you attach it with a long set of needle nose pliers. Seems like your only access is thru the wheel well opening, that right ?

    I've ordered the boot kit which includes clamps from StatRacing but never replaced these before so not sure what the clamp looks like/how it works and what tool is used to get them on.

  2. #2
    Veteran Member Four Rings EBG 18T's Avatar
    Join Date
    Mar 27 2005
    AZ Member #
    5877
    Location
    The Cold North

    Re: Replacing Rack boots with TRE replacement - B6

    Quote Originally Posted by razordog View Post
    When you go to install the inner clamp on a new boot can you attach it with a long set of needle nose pliers. Seems like your only access is thru the wheel well opening, that right ?
    yes access thru the wheel well and use a long set of needle nose pliers. it is a lsight pia.
    2001 A4 1.8TQM (in pieces..)
    2020 Chevy AEV ZR2

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.