Casa white front end

**solowb5** · 12-31-2008 10:51 AM

Anyone know where to find facelift fenders and a s4 front in casa white? I know I have a better chance on hitting the mega millions but, you'll never win if you don't play.

**andyrew** · 12-31-2008 10:52 AM

Good freeking luck.

I've been looking for that for about a year.

**geeky** · 12-31-2008 11:05 AM

Wouldnt it just be easier to buy facelift fenders + s4 bumper then have it repainted in casa white?

**TighTT** · 12-31-2008 11:08 AM

Originally Posted by solowb5

Anyone know where to find facelift fenders and a s4 front in casa white? I know I have a better chance on hitting the mega millions but, you'll never win if you don't play.

Trying to snag my RS4 fenders??

**JumboBlack1.8** · 12-31-2008 11:36 AM

^haha, its gonna be a battle for those things

**TighTT** · 12-31-2008 11:44 AM

Originally Posted by JumboBlack1.8

^haha, its gonna be a battle for those things

Not at all. I saw them and figured it would behoove me not to snap them up while I have the chance...even if I dont use them for a while. I e-mailed the kid first...so hopefully he (the seller) honors that.

**JumboBlack1.8** · 12-31-2008 11:50 AM

Well, I've gotta say that I hope YOU get them as well. It would just complete your car....but at the same time, solow's avant would be amazing as well......this has actually been a decent few months to find OEM RS4 parts....aanother seller had listed the Rear quarters, fender liners, and side skirts for around $3k....but those disappeared in a heartbeat

good luck with the purchase tho

**TighTT** · 12-31-2008 11:55 AM

Originally Posted by JumboBlack1.8

Well, I've gotta say that I hope YOU get them as well. It would just complete your car....but at the same time, solow's avant would be amazing as well......this has actually been a decent few months to find OEM RS4 parts....aanother seller had listed the Rear quarters, fender liners, and side skirts for around $3k....but those disappeared in a heartbeat

good luck with the purchase tho

I know...I saw those rear quarters with the "SOLD" next to them and punched a hole in my wall!! Keep your eyes out for some quarters for me.

**solowb5** · 12-31-2008 12:02 PM

It would be better on the car it came from ;) I've got it figured out now. My plans are to run a OEM RS4 front end with these one off custom replica of oem styled rs4 skirts made to fit a non widebody. Also run the closest looking rs4 avant rear from tmtuning or oem. At first I'll probally just roll the rears but, eventually will full convert it. I'm trying to get these skirts in production in the near future bc there are NO decent looking, oem flowing ones at all on the market.

**solowb5** · 12-31-2008 12:04 PM

I can probally get those for you if you really want them. I know a guy around here that has built a few. I know he has a oem bumper right now. Pm me if you are interested and I will see what I can do for ya.

**JumboBlack1.8** · 12-31-2008 12:06 PM

^^Agreed....I'd got a set of S4 sideskirts, which would definitely look okay with my RS4 front (provided that I don't sell it), but I'm definitely very interested in something that is more OEM RS4-like.....it'd be nice not to be constantly mistaken for an S4 avant once I get all my body work done

**TighTT** · 12-31-2008 12:06 PM

Originally Posted by solowb5

It would be better on the car it came from ;) I've got it figured out now. My plans are to run a OEM RS4 front end with these one off custom replica of oem styled rs4 skirts made to fit a non widebody. Also run the closest looking rs4 avant rear from tmtuning or oem. At first I'll probally just roll the rears but, eventually will full convert it. I'm trying to get these skirts in production in the near future bc there are NO decent looking, oem flowing ones at all on the market.

So...you plan to run OEM RS4 front bumper and fenders and some custom side skirts that will mate to the OEM RS4 fenders? What will they do in the rear? Also...what will rolling the rear fenders do? There is nothing to roll in the rear.

Not trying to be a dick here...but you may want to re-think your plan.

**TighTT** · 12-31-2008 12:08 PM

Originally Posted by solowb5

I can probally get those for you if you really want them. I know a guy around here that has built a few. I know he has a oem bumper right now. Pm me if you are interested and I will see what I can do for ya.

Was that post to me?? For rear quarters?

**JumboBlack1.8** · 12-31-2008 12:08 PM

You can def roll the rear. There was a post a few weeks back of a user rolling his rears (i think his SN is alen-something), but it can be done, just takes serious time and some fender-liner cutting to do properly.
I think he wants to run OEM rs4 bumpers, stock fenders, rs4-like skirts, and rolled fenders
*edit*
found it:
http://www.audizine.com/forum/showth...=fender*+roll*

**TighTT** · 12-31-2008 12:10 PM

Originally Posted by JumboBlack1.8

You can def roll the rear. There was a post a few weeks back of a user rolling his rears (i think his SN is alen-something), but it can be done, just takes serious time and some fender-liner cutting to do properly.

Maybe we arent talking about the same thing.
Our rear fenders are basically pre-rolled from the factory.....unlike the front fenders. Are you talking about PULLED rear fenders?

**JumboBlack1.8** · 12-31-2008 12:15 PM

See the link I posted above.....if I'm not mistaken, the tool he used is a fender roller, correct?

**solowb5** · 12-31-2008 12:16 PM

Ya I guess I mean more pulled then rolled. I want to use oem rs4 front bumper and fenders. The skirts I can have fitted to the front rs4 fenders. The rears will line up fine already.

Yes tt I was reffering to you on the rear quarter panels. I could make a few calls to see if something could be done for ya.

**TighTT** · 12-31-2008 12:19 PM

Originally Posted by solowb5

Ya I guess I mean more pulled then rolled. I want to use oem rs4 front bumper and fenders. The skirts I can have fitted to the front rs4 fenders. The rears will line up fine already.

Yes tt I was reffering to you on the rear quarter panels. I could make a few calls to see if something could be done for ya.

Hellz yea....Im game. Thanks for the help!

**VTAudiA4** · 12-31-2008 12:20 PM

TighTT and I have dibs on the fenders(TighTT) and bumper(me) right now. We've both been in contact with the seller. Im just going to mold the oem rs4 to my non-widebody A4.

**solowb5** · 12-31-2008 12:21 PM

ok once all this holiday shit passes and people are starting to back to real life I will get intouch with you. Even if it is a no go.

Sucks you're making it non-widebody

**TighTT** · 12-31-2008 12:22 PM

Originally Posted by JumboBlack1.8

See the link I posted above.....if I'm not mistaken, the tool he used is a fender roller, correct?

Yea...that b!tch is PULLED...not rolled.

**TighTT** · 12-31-2008 12:22 PM

Originally Posted by solowb5

ok once all this holiday shit passes and people are starting to back to real life I will get intouch with you. Even if it is a no go.

Sick.

**JumboBlack1.8** · 12-31-2008 12:23 PM

Haha, my B

**TighTT** · 12-31-2008 12:24 PM

Originally Posted by VTAudiA4

Im just going to mold the oem rs4 to my non-widebody A4.

Cant go wrong with that!!

**TighTT** · 12-31-2008 12:25 PM

Originally Posted by JumboBlack1.8

Haha, my B

No worries.

**solowb5** · 12-31-2008 12:25 PM

Those are rolled. He just flared them. Pulled I think wouldn't yield a lip like that.

Still wish I had found a pearl/casa avant instead :(

**JumboBlack1.8** · 12-31-2008 12:26 PM

Originally Posted by TighTT

Cant go wrong with that!!

This makes me not want to sell my bumper...

**TighTT** · 12-31-2008 12:30 PM

Originally Posted by solowb5

Those are rolled. He just flared them. Pulled I think wouldn't yield a lip like that.

Still wish I had found a pearl/casa avant instead :(

I hear ya...but AFAIK...thats pulled (even though he's using a roller). Rolling is usually tucking the metal lip up under the fenders outer lip...making it smooth and "rolling" it out of the way. Pulling is to actually widen the fender arch. Examples:

**VTAudiA4** · 12-31-2008 12:34 PM

TighTT, you should sell me your molded bumper. Then you can get the widebody bumper with those fenders. *waiting patiently*

Thread: Casa white front end

Thread Tools

Display

Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Re: Casa white front end

Bookmarks

Bookmarks

Posting Permissions