problem here

**Ber\/ani** · 12-24-2008 01:37 PM

so my tbb keeps coming loose and disconnecting.... its happened 2 times this week. i swear im getting that clamp (the bigger one of the 4) on tight, but it keeps coming off!!!!!!

any suggestions or special clamps i should be using? i asked this a while ago but this tbb it just f ing me over!!!!

**CONTROL ONE** · 12-24-2008 01:40 PM

Tbolt clamp or 2 worm clamps.

Hairspray the inside before clamping down as well. That shit will never move...

**Ber\/ani** · 12-24-2008 01:44 PM

Originally Posted by CONTROL ONE

Tbolt clamp or 2 worm clamps.

Hairspray the inside before clamping down as well. That shit will never move...

haha i thought about using hair spray actually. but then i was thinkin well hair spray is flamable... lol

**01treyS4** · 12-24-2008 01:49 PM

make sure the bottom of the tbb is on all the way and the clamp doesnt slide off the underside of the throttle body that might help i had to adjust my clamp a couple times because that was happening when i first installed it and its never came off

**Ber\/ani** · 12-24-2008 04:56 PM

Originally Posted by 01treyS4

make sure the bottom of the tbb is on all the way and the clamp doesnt slide off the underside of the throttle body that might help i had to adjust my clamp a couple times because that was happening when i first installed it and its never came off

the bottom seems to be good, but the top looks as if its not all the way on, prob just going to take it off and start from scratch

thanks all

**mholme** · 12-24-2008 05:09 PM

Can we assume this is an aftermarket boot? Do as others and yourself have said, just start over, get it clamped down good. I shreded a samco boot a while ago because the clamp wasn't seated well. It's useless now..