Found the turbo for me, programming/injector options?

[nihil]

It's going to require some exhaust work, but...

Turbonetics Releases New 122mm Billet Turbo - we call it the "Baby Killer"

When you think the world of turbos for automotive use is at their biggest, we all get surprised again. Turbonetics has released their new TNX-122, 122 MM turbo. The kit is designed for top tier racing, such as, Pro Mods and really for diesel sled pulling competitions. “Diesels go for the most amount of boost you can possibly fit in an engine�, says Turbonetics Marketing Manager, Tyler Tanaka.

Compared against a Turbonetics T3 turbo

The turbo is capable of producing over 2500 horsepower, while supporting 50-60 PSI. The center section is an all-new billet piece. It allows Turbonetics to build a stronger internal bearing with a new, patented oiling system. Also, the compressor wheel is made from a billet 713C super-alloy. “When you run this much boost on a cast wheel, it can expand from the center and explode.� Tyler remarked. Regardless, make sure small animals are not present while in operation.

[mattman]

....there goes that power to weight ratio :(

[QTC]

Lol at calling it "The Baby Killer"

[03 silverbullet]

will a 1.8 even be able to get that thing to spool before 7,000 RPM ?

[widgget]

that thing is almost as big as the 1.8 block. 90% of that would be above the hood.

[A4 Moda]

let's see... 8 liters of oil for the turbo, 4 for the engine.

Yeah, good numbers.
I'd say, rev threshold is around 10K-12K? before you start seeing any spool.

I say do it. You don't know until you've tried it right?

=D

[AudiA4Turbo22]

u need a V12 to spool that at like 5k RPM's ahaha