power steering fluid flush DIY

[collegedude10]

wow this is a really good write up.

[BretSV]

Awesome write up! I wouldn't have had the confidence to try this if it wasn't for your step by step.

Want to add that it is a T30 Torx bit that holds the headlight in, atleast in my case ('02 3.0L), not a T40.

Oh and for me at least, the 3/8" barb adapter was much too small even with the clamp over it, it would drop in and out with no resistance what so ever, I wrapped it in some electrical tape as well to make it thicker and it held, but still leaked and spurted out quite a bit. I'd recommend the next size up barb if that isn't too large.