vacuum leak inside

[1fstavant]

so i go to the shop, they test it for vacuum leaks, i come back, inj o rings leaky, and a couple other spots including my turbo, for some reason my turbo is leaking air out around the seal and actually sending air into my crankcase has anyone ever experienced this

o yea not to mention i found out i detonated a little bit, based on a couple little black specks on my plug

[Don Supreme]

There is a seal on the compressor side of the turbo designed to stop the air from leaking.... That seal should be replaced during a standard t series rebuild job.

[1fstavant]

where would i buy this seal...and how hard is it to install

[Don Supreme]

Probably better if you send it to the pros --

http://www.gpopshop.com/garrettt3kits.html

[1fstavant]

mine didnt have one so arnold told me to throw a lite bead of silicon around it...so i did that

[t1demont1]

awesome youll be boostin fine again soon.

[1fstavant]

so it runs no oil leaks-good thing, sending the ecu to arnold tomarrow to get it retuned for a richer mixture, maybe it was the tune after alll however i do have some things for sale now lightning maf, and 630 siemens

[t1demont1]

What software will you be using if your selling injectors and maf?

[1fstavant]

no i bought new ones so i, selling the old ones that were good-since absolutely no change came about swapping them over