Audizine - An Automotive Enthusiast Community

Results 1 to 3 of 3
  1. #1
    Veteran Member Four Rings aytheory's Avatar
    Join Date
    Oct 28 2006
    AZ Member #
    12946
    My Garage
    A4 1.8tqm 99.5 aeb ndbw
    Location
    Los Angeles / Santa Barbara

    fitment and rub question

    Guest-only advertisement. Register or Log In now!
    18x8 front and 18x9 rear
    Offset is 32mm front + 5 mm spacer (BBK needs it) and 28mm rear

    running on vogtland springs and koni shocks


    225/40/18
    or
    235/40/18

    this is all around i want to keep rolling diameter the same

  2. #2
    Veteran Member Four Rings savetheclutch's Avatar
    Join Date
    Oct 01 2006
    AZ Member #
    12183
    My Garage
    ducatis and a miata
    Location
    Fort Lee, NJ

    Re: fitment and rub question

    if you are low then 225/40/18 is the biggest you can go, 235 will rub like no other.. believe me i know from experience :( I have to get the paint fixed soon

    I am running 215/40/18 18x8.5 in the front and 225/40/18 18x9 in the back

    not the best pic but you get the idea


    AKA: andresito360

  3. #3
    Established Member Two Rings mnsirtee's Avatar
    Join Date
    Aug 19 2007
    AZ Member #
    20397
    Location
    los angeles

    Re: fitment and rub question

    yup, 235 will rub for sure. if you don't remember, i was the one that bought some tires off you long ago which where 235. i had inner rubbing so i bought some 10mm spacers and now i have fender rub. the tire you sold me had inner rubbing.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.