parting BT kit

[Saskwatch]

I am going a totally different route with my A4

so up for grabs is as follows

40mm synapse synchronic waste gate, brand new in box..............250.00

ATP log manifold t/3 ................................................ 200.00

Garrett .50 comp .63 exhaust turbo, rebuilt, 0 miles since rebuild.....300.00

I have a pic of everything mocked up on the manifold..

here ya go












I have another comp cover for the turbo, if the shaved one is an issue..

prices are firm...no lowballs

Thanks-

Tim

I also have some mandrel bends, and charge piping.. I'll get that stuff up later..

[DenverNoob]

whats the new plan?

[Saskwatch]

to get the handling of the car pinned down, and not have to run a "mod" class my first year out auto x'ing..

so basically going the suspension route first!!

ps. i will knock of 15.00 bucks on every item if a local AZ member buys..

if someone buys the entire setup i will knock 50.00 off the total.. (700 out the door)

[LampyB]

is this stuff for a B6? what power output will the turbo have, and where was it rebuilt?

[Saskwatch]

I rebuilt it, I am a certified garrett guy ;)..

power output is 400+ flow numbers are 46 lbs/min 588cfm

and just for good measure...





(the manifold is for a b5)

[FLACO X3]

injectors available? if so what size?

[Saskwatch]

I have no injectors, but I would recommend at least a 630cc set!!

[FLACO X3]

I have no injectors, but I would recommend at least a 630cc set!!

thats what i need

[Saskwatch]

sold!!!!