$350!

[thursdaysstrike]

is what i have to spend on a new rear bumper...anyone know of anything good that i could buy for that much?
i found a couple but its hard to tell if its good or not
heres one...let me know

http://www.myhotaudi.com/audi_produc...r_Bumper/2003/

[romell]

ummm...

[romell]

that will put you over 350 look at shipping. and thats a regier rear kit... but i say you save up a little more and get the S4 rear from Greg (400HPA4)

great prices and great guy.

[onceover]

thats not a whole lot.... doubt youll find a better deal

That one in the link is ugly.

Go OEM. or USP

[romell]

oooh do this do this. http://www.myhotaudi.com/audi/DoorKi...or_Kit/549366/

[4Rings3Liters]

I would save up a little more and get an S4 rear.

[italian a4 1032]

its going to be about 400 or more just for paint and install

[PCYC]

WTF save your money fiberglass is worthless trust me

[jessefrank]

I'd go OEM. Even with what I've seen from Pro kits (non audi) and not knock-offs...they don't fit/hold up like OEM. Don't get fiberglass.

If you don't need one right now...search the classifieds, local body shops, online shops or Ebay. I searched for several months and lucked into a used full USP rear on Ebay for 180 shipped. A little filler for deep scratches and some paint and it is like new.

I'd search for a USP or S4 rear.

[thursdaysstrike]

do the s4 rears fit on out car or does it have to be a specially made s4 bumper for the a4...might be a dumb question but i dont know if the set up is the sat for the 2 cars

[jessefrank]

OEM S4 or USP fit just fine. If you get a S4 or USP rear you need both pieces (upper and lower/the complete bumper).

The USP is shorter (i.e. dosen't stick out as far off the body and is actually higher off the ground than stock. The USP also requires you to redrill your bumper shocks or buy the very expensive rebar from the dealer.

The S4 has 2 pieces, but is pretty much a one piece bumper in that the lower portion is the small trim piece around the exhaust tips and the rest is one piece.

S4 would be easier being that you only have to bolt it on. The USP requires you to drill 4 new support holes in your rebar/bumper shocks. Other than that it ain't hard and both fit.

[texasboy21]

usp and s4 diy lowers

barrett

[misterjj2u]

not sure if anyone else has seen this yet but you can get (what looks like) a USP bumper for $99 (+$75 for shipping) on ebay...

http://cgi.ebay.com/ebaymotors/audi-...Q5fAccessories

[BEESIX]

not sure if anyone else has seen this yet but you can get (what looks like) a USP bumper for $99 (+$75 for shipping) on ebay...

http://cgi.ebay.com/ebaymotors/audi-...Q5fAccessories

that car is in my area i was looking at it for parts but it didnt have anything i needed, it is a usp rear, the whole front is chopped off or else i would have had a usp front =[ lol i say jump on it, if you guys dont wanna go the ebay route i cant go buy it from him and ship it, and you guys will probably save some shipping costs

[thursdaysstrike]

that car is in my area i was looking at it for parts but it didnt have anything i needed, it is a usp rear, the whole front is chopped off or else i would have had a usp front =[ lol i say jump on it, if you guys dont wanna go the ebay route i cant go buy it from him and ship it, and you guys will probably save some shipping costs

are you saying you can buy this for someone and ship it to them for cheaper?
if thats the plan ill love it

[BEESIX]

exactly what im saying lol, ill talk to ups and calculate shipping today, i can just go to the guys house and pick this thing up

[dougyfresh]

$350? with paint? Ha. Good luck.


I paid $300 shipped for my S4 rear and another $200 for paint. I have not seen another deal like that ever since.

[thursdaysstrike]

yah man let me know how much the shippin total will be...if this goes through it would make my week!