Audizine - An Automotive Enthusiast Community

Page 1 of 2 12 LastLast
Results 1 to 40 of 67
  1. #1
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    New product! CNC machines aluminum wheel hangers - $15 shipped!

    Guest-only advertisement. Register or Log In now!
    We are offering wheel hangers now which are CNC machined out of aluminum.

    It is machined on one end to allow for a socket in case you get it stuck.

    The hanger is 114mm (4.5") long and 12mm for VW and BMW fitiment and 14mm for Audi and Mercedes Benz fitiment

    $15 shipped!!

    Click here to order a 12mm wheel hanger!

    Click here to order a 14mm wheel hanger!

    Last edited by [email protected]; 11-24-2008 at 02:08 PM.

  2. #2
    Veteran Member Three Rings scot_w's Avatar
    Join Date
    Apr 05 2006
    AZ Member #
    11219
    My Garage
    '04 allroad 4.2, '00 A4 1.8T QWSM
    Location
    USA

    Re: Anyone need a wheel hanger?

    Nice. Just in time for the change to winter wheels. Any issues with the finish of the hanger against the finish of the wheels? Gentle on the wheels is the only good thing about the factory hanger.

  3. #3
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: Anyone need a wheel hanger?

    No issues with the finish of the hanger against the wheels.

    The body of the hanger is silky smooth.

  4. #4
    Veteran Member Four Rings Sablea4's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    25
    My Garage
    2018 Suburban, Husqvarna riding mower :P
    Location
    Charlotte, NC

    Re: Anyone need a wheel hanger?

    i want. where do i send the paypal
    Current: 2017 Audi Q7 Premium Plus. Carrara White with Nougat Brown interior. APR Stage 2, RocEuro intake, BMC filter
    Sold: 2005 Audi A4 Ultrasport Avant red with manual transmission USP CLUB MEMBER #6
    Sold: 2004 VW R32 Deep Blue Pearl
    Sold: 2010 VW CC Shadow Blue Metallic manual transmission

  5. #5
    Established Member Two Rings
    Join Date
    Jun 13 2007
    AZ Member #
    18784
    My Garage
    2005.5 A4 2.0T 6MT
    Location
    Leesburg, VA

    Re: Anyone need a wheel hanger?

    As do I... I want I want.
    2000 A4 1.8TQM Ebony Pearl
    210K on the Clock and going...

    2005.5 A4 2.0T Quattro 6MT Moro Blue
    Heated seats. Winter calls.

    ************************
    Future Plans
    B8.5 S5... at some point... or a Cayman.

  6. #6
    Veteran Member Four Rings agkellyboy's Avatar
    Join Date
    Feb 27 2007
    AZ Member #
    15985
    My Garage
    2010 S4
    Location
    Philly 2 Bmore

    Re: Anyone need a wheel hanger?

    Yes, do want. paypal?
    FS - Dolphin B7 A4 Ti 2.0T MT6 Quattro Project 400R

  7. #7
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: Anyone need a wheel hanger?

    Link to purchase the wheel hanger has been added to first post.

    Thanks!

  8. #8
    Veteran Member Four Rings AudiBoy808's Avatar
    Join Date
    Sep 28 2004
    AZ Member #
    3616
    My Garage
    99.5 A4
    Location
    Honolulu, HI

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Alright good deals I just ordered mine.

    Thanks,
    99.5 silver A4

    FI CF hood | Eurogear CF Euro trunk | Eibach Pro-St coil overs | Crimson K6 | Kerscher frnt | Avant garde sides | RSR Rear | Vibrant exhaust | Silver CF rear seat inserts |

  9. #9
    Veteran Member Three Rings scot_w's Avatar
    Join Date
    Apr 05 2006
    AZ Member #
    11219
    My Garage
    '04 allroad 4.2, '00 A4 1.8T QWSM
    Location
    USA

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Count me as ordered.

  10. #10
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Got your orders.

    I'm having a new batch cut and will ship out ASAP.

  11. #11
    In Limbo Four Rings
    Join Date
    Sep 27 2006
    AZ Member #
    12049
    My Garage
    2005 Audi B6 1.8t Ultrasport
    Location
    New Jersey

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    how bout your plate (your splitter+body skid plate..)!!! any update on that...

  12. #12
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Still trying to find a place that can mass produce the bellypan for a decent price.

    The bellypan will be a bolt on replacement for the OEM plastic one but the integrated splitter will not be offered as it required quite a bit of tweaking to get it to look and fit exactly the way I want.

    Then comes the issue of the fasteners required to hold it in place.

  13. #13
    Senior Member Three Rings outkasta4's Avatar
    Join Date
    Dec 26 2004
    AZ Member #
    4613
    My Garage
    96 A4 2.8, 02 A4 1.8t
    Location
    central coast,CA.

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    This product looks great, just ordered

  14. #14
    Established Member Two Rings
    Join Date
    Jun 13 2007
    AZ Member #
    18784
    My Garage
    2005.5 A4 2.0T 6MT
    Location
    Leesburg, VA

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Just ordered myself one too. Thanks!
    2000 A4 1.8TQM Ebony Pearl
    210K on the Clock and going...

    2005.5 A4 2.0T Quattro 6MT Moro Blue
    Heated seats. Winter calls.

    ************************
    Future Plans
    B8.5 S5... at some point... or a Cayman.

  15. #15
    Veteran Member Three Rings Mezzer's Avatar
    Join Date
    May 23 2008
    AZ Member #
    29115
    My Garage
    19 SQ5 & 08 RS4
    Location
    Gas station

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    I already put my snows on... but this'll be great for the spring!!

    Order placed.
    Old enough to know better... Young enough to do it again, just getting harder to recover.

  16. #16
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    I'll be picking up the hangers this weekend and get them shipped out next week

  17. #17
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Weekend bump!

  18. #18
    Veteran Member Four Rings
    Join Date
    Dec 01 2007
    AZ Member #
    23013
    Location
    Markham, Ontario

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    waiting for your bellies as well =)
    2015 BMW M3 Alpine White
    2013 Phantom Black RS5
    2012 Audi TTRS Black / Black - Sold
    Plus One
    Gabriel
    3255 Highway 7 East Unit 159
    Markham Ontario
    Canada
    905 477 6990

    Cellular sales / repairs / unlocking / flashing - PM if you need help with anything

  19. #19
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    12mm hangers are now available for those of you that need one for a VW or BMW

  20. #20
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    To everyone who did order right away I'll have your hanger shipped out this week.

    I ran out of stock so I ordered another batch of them today.

    These things make great stocking stuffers!

  21. #21
    Veteran Member Three Rings TRANS4M's Avatar
    Join Date
    Sep 15 2006
    AZ Member #
    11400
    My Garage
    02 Imola S4
    Location
    VA

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    you have the Audi/MB hangers in stock?

  22. #22
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    I should be getting the next order of hangers in this week

  23. #23
    Veteran Member Three Rings scot_w's Avatar
    Join Date
    Apr 05 2006
    AZ Member #
    11219
    My Garage
    '04 allroad 4.2, '00 A4 1.8T QWSM
    Location
    USA

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Got mine in the mail today.

    Any thoughts on why there are ridges in the middle? Looks like the lathe did not quite finish the job.

  24. #24
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    There should be no ridges on the bolt body as it should be very smooth.

    If you look carefully at the picture there is a very fine line in the middle where the hanger was reversed on the lathe as one side it cut, hanger reversed and then the other side is cut.

  25. #25
    Veteran Member Three Rings scot_w's Avatar
    Join Date
    Apr 05 2006
    AZ Member #
    11219
    My Garage
    '04 allroad 4.2, '00 A4 1.8T QWSM
    Location
    USA

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    The one I received has several lines, almost like the machining was not finished before it was removed from the lathe.







  26. #26
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    As I mentioned the hanger is cut halfway then flipped to have the other half cut, the ridge is where the cut meets. I checked the recent order of hangers I just received and that center ridge is more visible on some hangers than others.

    I measured a few of these hangers with my digital caliper and the tallest ridge is 0.0015" taller than the body which will not affect how the hanger works or damage a wheel that makes contact with the ridge.

    If the ridge bothers you on your hanger please send it back to me and I'll try to get you the smoothest one from the current batch or I can issue you a refund. However, I do not have a hanger where the ridge does not exist.
    Last edited by [email protected]; 12-04-2008 at 03:50 AM.

  27. #27
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Quote Originally Posted by TRANS4M View Post
    you have the Audi/MB hangers in stock?
    All hangers are in stock now

  28. #28
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    To everyone who placed an order your hanger was shipped yesterday.

    Thanks.

  29. #29
    Veteran Member Four Rings boy412's Avatar
    Join Date
    Jul 15 2007
    AZ Member #
    19553
    My Garage
    2015 Golf Sportwagen TDI, 1988 Alpineweiß 325iC
    Location
    Mount Rainier, MD

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Winston is like Steve Jobs...he keeps coming up with shit that we ALL want to own!

    ~Eric
    SOLD: '03 Ming Blue A4 Avant 1.8TQM | GTRS | MTM cat/exhaust | Maestro | Spec Stage III+ | Vogtlant GT's | JHM trio | STE PPD | OEM+

  30. #30
    Veteran Member Three Rings orangelmo's Avatar
    Join Date
    Jul 05 2007
    AZ Member #
    19322
    Location
    Stouffville

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    podi = ipod ??? coincidence? i think not

    Quote Originally Posted by boy412 View Post
    Winston is like Steve Jobs...he keeps coming up with shit that we ALL want to own!


  31. #31
    Senior Member Two Rings 4ringsinLA's Avatar
    Join Date
    Sep 26 2006
    AZ Member #
    12033
    My Garage
    B7 A4 Avant
    Location
    socal

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    just ordered :D

  32. #32
    Veteran Member Four Rings Sablea4's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    25
    My Garage
    2018 Suburban, Husqvarna riding mower :P
    Location
    Charlotte, NC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    got mine and already used it. If your upset about the ridge thats just a little ridiculous. its $15 and works great. thanks Winston
    Current: 2017 Audi Q7 Premium Plus. Carrara White with Nougat Brown interior. APR Stage 2, RocEuro intake, BMC filter
    Sold: 2005 Audi A4 Ultrasport Avant red with manual transmission USP CLUB MEMBER #6
    Sold: 2004 VW R32 Deep Blue Pearl
    Sold: 2010 VW CC Shadow Blue Metallic manual transmission

  33. #33
    Veteran Member Three Rings scot_w's Avatar
    Join Date
    Apr 05 2006
    AZ Member #
    11219
    My Garage
    '04 allroad 4.2, '00 A4 1.8T QWSM
    Location
    USA

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Quote Originally Posted by Sablea4 View Post
    If your upset about the ridge thats just a little ridiculous.
    It was not just one ridge on the one I got. The milling had not completed so the ridge did not line up, it was more like two ridges and a couple of sharp corners. Not sure why voicing a concern is ridiculous.

  34. #34
    Veteran Member Four Rings Sablea4's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    25
    My Garage
    2018 Suburban, Husqvarna riding mower :P
    Location
    Charlotte, NC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    nothing a little sandpaper wont fix
    Current: 2017 Audi Q7 Premium Plus. Carrara White with Nougat Brown interior. APR Stage 2, RocEuro intake, BMC filter
    Sold: 2005 Audi A4 Ultrasport Avant red with manual transmission USP CLUB MEMBER #6
    Sold: 2004 VW R32 Deep Blue Pearl
    Sold: 2010 VW CC Shadow Blue Metallic manual transmission

  35. #35
    Veteran Member Three Rings scot_w's Avatar
    Join Date
    Apr 05 2006
    AZ Member #
    11219
    My Garage
    '04 allroad 4.2, '00 A4 1.8T QWSM
    Location
    USA

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    A file or my grinder, but no way with just sandpaper on the one I got. But really Winston has already offered a replacement so no real need to say anything more than he is a stand up guy that is making it right.

  36. #36
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Winston is like Steve Jobs...he keeps coming up with shit that we ALL want to own!
    LOL! Thanks for the kind words.

    Now wait for the snub mount I'm designing!

    podi = ipod ??? coincidence? i think not
    SHHHHHHH!!! I don't want their bots to figure that one out yet!

    It was not just one ridge on the one I got. The milling had not completed so the ridge did not line up, it was more like two ridges and a couple of sharp corners. Not sure why voicing a concern is ridiculous.
    Don't sweat voicing any issues as that as how products improve... that is if the seller/manufacturer is willing to listen

    I would rather lose a sale than have an unhappy customer with my product.

  37. #37
    Veteran Member Three Rings scot_w's Avatar
    Join Date
    Apr 05 2006
    AZ Member #
    11219
    My Garage
    '04 allroad 4.2, '00 A4 1.8T QWSM
    Location
    USA

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Quote Originally Posted by [email protected] View Post
    Don't sweat voicing any issues as that as how products improve... that is if the seller/manufacturer is willing to listen

    I would rather lose a sale than have an unhappy customer with my product.
    Which is why my follow up post reads: "But really Winston has already offered a replacement so no real need to say anything more than he is a stand up guy that is making it right."

    Unless you are the guy making the product, and have bad QC, there is little a vendor can do but make it right. You make it right, follow up, and keep coming up with cool new stuff. How can that be anything but good?

  38. #38
    Veteran Member Three Rings TRANS4M's Avatar
    Join Date
    Sep 15 2006
    AZ Member #
    11400
    My Garage
    02 Imola S4
    Location
    VA

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Quote Originally Posted by [email protected] View Post
    All hangers are in stock now
    Just placed my order.

  39. #39
    Registered User Four Rings winston@podi.ca's Avatar
    Join Date
    Jun 11 2005
    AZ Member #
    6841
    My Garage
    Pods, gauges and more pods
    Location
    Vancouver, BC

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Order now and get them just in time to stuff stockings!

  40. #40
    Veteran Member Three Rings TRANS4M's Avatar
    Join Date
    Sep 15 2006
    AZ Member #
    11400
    My Garage
    02 Imola S4
    Location
    VA

    Re: New product! CNC machines aluminum wheel hangers - $15 shipped!

    Do you provide tracking info?

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.