Free shipping on ARP 1.8t Head Bolts from IE!

[Pete@IE]

We have been an ARP distributor for a LONG time due to the rod bolts we buy. We finally decided to get going and start selling some of their regular applications as well. That said, we have picked up a couple of big stacks of these ARP 1.8t head bolts, and would like to get them MOVIN.



10MM ARP 1.8t Head Bolt w/o Tool $124.95

10MM ARP 1.8t Head Bolt with Tool $149.95

To get your free shipping (Fedex Ground) in the lower 48 states, use code: azenginefreeship

[Pete@IE]

sweat deal bump

[Pete@IE]

lots in stock...

[Pete@IE]

All orders on ARP stuff have shipped. Thanks!

[ghost6303]

do you make these in 11mm that arent $350?

[317ssayzarc]

Wrong forum Pete

Unless you are going after the 01' only guys...

Jk

[Pete@IE]

LOL... Weren't a lot of 2000's also 19mm pin / new style motors? We definitely need to get ARP to do the 11mm ones as well. Right now eurospec sells a "reusable" 11mm bolt but meh. I have contacted fastener manufacturing companies before and not many can get the tensile strength and overall quality that ARP does.

[Wizard-of-OD]

We definitely need to get ARP to do the 11mm ones as well.

ARP is allready doing 11mm ones.The 10mm units were done first @ Javads request.The 11mm units will come later followed by Stud & Nut format early next year.

[Pete@IE]

Stud & Nut format huh... They think they have a cylindrical nut figured out that won't mushroom?

The major benefit to a stud / nut is it allows a fine thread on the nut to be used, but man are they ever tough to make work on the 20v.

[317ssayzarc]

LOL... Weren't a lot of 2000's also 19mm pin / new style motors? We definitely need to get ARP to do the 11mm ones as well. Right now eurospec sells a "reusable" 11mm bolt but meh. I have contacted fastener manufacturing companies before and not many can get the tensile strength and overall quality that ARP does.

19mm wrist pins, but still 058 block... So 11mm only

[Wizard-of-OD]

They think they have a cylindrical nut figured out that won't mushroom?

IMHO if they are over torqued or just installed incorrectly then they will mushroom.
The advantage to this is that we wont have to pay through our asses for studs anymore.

[Poopie]

19mm wrist pins, but still 058 block... So 11mm only

atw's had 20mm pins. they just had a small port head.

[Pete@IE]

Interesting, for whatever reason I thought they switched to 06a when they went DBW.

Well, when the 11mm's do arrive, I'll make sure to put together a sick special on them. Plus I need a set for myself :)

[317ssayzarc]

atw's had 20mm pins. they just had a small port head.

You win


...

[Pete@IE]

this is off topic, but does anybody else ever wonder why VAG decided to build like 100+ 1.8t varients? lol

Granted, there are a lot of real common ones, but I still hear new ones (BBU?) like once every couple of weeks.

[Poopie]

this is off topic, but does anybody else ever wonder why VAG decided to build like 100+ 1.8t varients? lol

Granted, there are a lot of real common ones, but I still hear new ones (BBU?) like once every couple of weeks.

yeah i always hear of new ones. It was annoying when i was trying to find and 06a block to build. Someone would be selling a cheap 1.8t bottom end. I would get excited.....then find out the code was an obscure 058 block. totally weak.