Audizine - An Automotive Enthusiast Community

Results 1 to 7 of 7
  1. #1
    Veteran Member Four Rings $teady$upreme's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    102
    My Garage
    2009 A3 2.0T Quattro S-Line
    Location
    Vancouver, BC Canada

    BT guys, show me your intake setup please.

    Guest-only advertisement. Register or Log In now!
    Prefer intake setup with MAF.

    I am about to make my own, but i have a ATP inlet for gtrs elim and it won't work on gt28rs. I notice the square box ATP inlet has N75 nipple and DV hole for it, so how can i transfer it to my gt28rs?

    Here is what im thinking:

    gt28rs > 3" ID 90* silicone hose > hard pipe with nipple for evap > hump hose > VR6 MAF > 3" ID 3" length hose > cone filter

    But im still missing the nipple for the N75 and DV bung, or is there a different way to set it up.

    Or should i just run a HKS BOV, will it be an easier setup?
    99.5 A4 GT28RS 1.8TQSM Volcano Black & CW Acura Integra Type-R 99-0010
    IG:@steadysupreme
    Pics&Detail

    Go-Eurodyne/GT28RS/ATP/Siemens/Bailey/Blitzkrieg/FMIC/CMfx400/Fidanza/Greddy/Innovate/Walbro/Meth
    Footworks-BBS RGR/CCW/BilsteinPSS9/034/Stern/ASP/APR
    Misc-Porsche/S4rear/Rieger/Ecodes/V&S/Sparco/Podi/Blitz/AWE/Panzer

  2. #2
    Veteran Member Four Rings sean1.8t's Avatar
    Join Date
    Sep 17 2006
    AZ Member #
    11598
    My Garage
    I wish I had a garage.
    Location
    SLC, UT

    Re: BT guys, show me your intake setup please.

    search audisnapr.

    he had quite the intake setup on his 28rs back in the day.

    and the "show me your intake" thread had some BT intakes in there. i'd take a look if you haven't already.

    and i'd post mine. but to MAF here
    Current:
    '16 Mercedes-Benz C450 "AMG": Stage 2 w/downpipes & 19" BBS CH-R's
    '88 Harley-Davidson Sporty 880: 1200 bottom - Ported & Cam'd top - S&S In - Screamin' Eagle Out

    Previous:
    '02 Audi A4 1.8TQM: Full GT28RS on meth w/everything else.
    '01.5 Audi A4 1.8TQMS: Tune and exhaust.
    '99 Subaru Legacy Outback wagon Manual: Bone stock.
    I don't even want to remember the others

  3. #3
    Veteran Member Three Rings
    Join Date
    Sep 17 2006
    AZ Member #
    11619
    My Garage
    07 cbr600
    Location
    NJ

    Re: BT guys, show me your intake setup please.


  4. #4
    Veteran Member Four Rings JumboBlack1.8's Avatar
    Join Date
    Sep 16 2006
    AZ Member #
    11514
    My Garage
    '98 528i
    Location
    Boston/West Hartford, CT

    Re: BT guys, show me your intake setup please.

    Back when I was using an MAF, I used both the hard pipe and the two fittings on the square metal box from the ATP inlet to make an intake.......drilled some holes into the hard pipe and used the small nipple for vacuum, and the large brass fitting to recirculate my DV. However, with an MAF, the setup had to be plumbed fairly low in the engine bay (watch out for puddles!)

    Right now on my MAF-less file, I'm running just a 3" 90degree silicone to the ATP hardpipe to a 3" filter. Though a TIP isn't necessary for me, I'm using one of the bungs on the hardpipe to recirculate my catch can

    heres a bad pic
    2000 Audi B5 S6 ** 4.2L 40v S6 6spd - http://www.audizine.com/forum/showth...n-s6-4-2L-swap

  5. #5
    Veteran Member Four Rings fred2ka4's Avatar
    Join Date
    Nov 26 2005
    AZ Member #
    8960
    My Garage
    Audi A4, Honda Pilot
    Location
    NM

    Re: BT guys, show me your intake setup please.

    This is a setup that I made using a Fujita dry superflow intake that has a built in Velocity Horn. The piping is 2.5" with a 2.5 - 2.75 step-up connector hose for the MAF. They sell the filter with a 2.75" opening so that there would be no transition but I already had the piping made.




    BetaAlphaTau member #18

    2000 Audi A4 w/ APR stage III & ...

    APR // GReddy // RACETEC // Bilstein // IForged // ECS Tuning // STaSIS // Neuspeed // H&R //

    And a whole bunch of other stuff ...

    http://i78.photobucket.com/albums/j9...4/fredscar.jpg

  6. #6
    Veteran Member Four Rings dougyfresh's Avatar
    Join Date
    Dec 03 2005
    AZ Member #
    9070
    My Garage
    2 pedals 1FG
    Location
    connecticut

    Re: BT guys, show me your intake setup please.

    Quote Originally Posted by Russell2686 View Post
    -Doug
    2002 A4 Avant EPL tuned 2.7T K04 6spd

  7. #7
    Veteran Member Four Rings $teady$upreme's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    102
    My Garage
    2009 A3 2.0T Quattro S-Line
    Location
    Vancouver, BC Canada

    Re: BT guys, show me your intake setup please.

    Here is my current setup for my gtrs elim,


    Check the ATP inlet block, there is the DV brass fitting and small nipple for N75. For my new setup, im going to use a 90* silicone elbow, how can i have those two things on my silicone elbow?
    99.5 A4 GT28RS 1.8TQSM Volcano Black & CW Acura Integra Type-R 99-0010
    IG:@steadysupreme
    Pics&Detail

    Go-Eurodyne/GT28RS/ATP/Siemens/Bailey/Blitzkrieg/FMIC/CMfx400/Fidanza/Greddy/Innovate/Walbro/Meth
    Footworks-BBS RGR/CCW/BilsteinPSS9/034/Stern/ASP/APR
    Misc-Porsche/S4rear/Rieger/Ecodes/V&S/Sparco/Podi/Blitz/AWE/Panzer

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.