Wiring diagram for a headlight?

[alexza4]

Anyone has one for a non HID headlight please? Need to know which wire is for parking light... my damn multitester kicked the bucket...

Also is there a way to reroute the parking lights to come on via different lights (only side for example), and then use the front lights as turn only?

Thanks!

[T0M3K]

Good question, I guess the wiring should be the same for all headlamps, since swapping is just plug and play.

[alexza4]

^not helping...

anyone folks? I just need to know which whire is the parking lights wire...

[A4 Moda]

Only one way to do it. OLD SKOOL.

This is how I approached the problem and solved it.

Use a TEST Light my friend.
2 Dollars at any electronics or hardware store.

Test each wire individually.

GL

[diagnosticator]

L/F park is grey/black R/F park is grey/red.

The wiring differences between combintion park/ts and e-code ts only are inside the headlight housings.

[alexza4]

L/F park is grey/black R/F park is grey/red.

The wiring differences between combintion park/ts and e-code ts only are inside the headlight housings.

Excellent! Thank you!

One other question real quick, which resistor do i need to wire in parallel on the park/ground to not get the bulb out?

[diagnosticator]

Excellent! Thank you!

One other question real quick, which resistor do i need to wire in parallel on the park/ground to not get the bulb out?

Try a 220 ohm, 1 watt pdr rated resister, that is the value that works for LED city lights, on E-code housings. The city lights are powrered by the parking light circuit.

[alexza4]

Try a 220 ohm, 1 watt pdr rated resister, that is the value that works for LED city lights, on E-code housings. The city lights are powrered by the parking light circuit.

Perfect! Thank you!