ZIZA HELP!

[Frizholy]

so i got the old bulb out but the new ziza does not fit, at all.. the harness doesn't attach and if I take the LED bulb out of the ziza harness, that doesnt fit into the OEM harness either.. did ECS even send me the right ones? They look different than the picture (no coils)



PLEASE HELP i feel retarded...

[upstateA4]

those are the right ones. The Ziza harness should plug right into the socket for the old city light. No need to remove the LED bulb from the harness, but if you have already, do yourself a favor and use some plastic cement to secure the LED bulb to the harness. You'll save yourself alot of grief this way.

[Frizholy]

i was killing myself trying to do it so i just put the stock one back together.. and now i have a bulb out warning


ill fix it later

edit: i need a pic tutorial for my dumb ass

[rudtf]

that white part fits into where the stock bulb was. it's a tight fit, but it'll go in.

[Frizholy]

i like literally couldnt fit it..

like the white part looks too thick

[rocchioj]

I have EXACTLY the same problem. I posted about it and all i got back was- something along the lines of -its a tight fit and you have to squeeze them in. This is no tight fit! lol. There is absolutely no way the ziza light is fitting into the socket the old bulb comes out of.

[Frizholy]

yea idk what the fuck is going on...

should i try modding the plastic by shaving it a little? idk what to do!

[cstarky15]

try talking to ECS and see what they say about it!

[Frizholy]

yea i think im gonna call today.. real bummer though because i actually got the bulb out etc... !!!!!!!!!!!

[ECS Tuning-Audi]

If for some reason the base for the LED's will not fit down into the stock socket, you can shave a little bit of the edges of the base. I know one set I installed was a little wide and very difficult to get into the OEM socket, shaving just a small amount off the edges of the Ziza base let them slide right in.