Wow, 12 Codes.... Help me with a friends car please...

[chinaonnitrous1]

Sorry to barge into this great forum...

I've owned an Audi before, A6 2.7T w/ 6spd. But only for a few months. I've moved on with a S60r.

However my friend just purchased a 2004 Audi A4 Wagon with the 3.0 6 cyl.

Great car, as its a Quattro, and 6spd Manual.

There were codes pending before, but they were all cleared and everything was great for about 1500 miles.

Now as he was driving to Bakersfield the car shakes and loses power. He notes that the passenger side is glowing red (lean condition?)

We pull codes today, and holy ......

P1128 Bank 2 Lean
P1130 Bank 1 Lean

P0300 Misfire
P0301 Misfire 1
P0303 Misfire 3
P0306 Misfire 6
P0305 Misfire 5
P0304 Misfire 4

P0150 Bank 2 sensor 1
P0130 Bank 1 sensor 1
P0113 Intake Air Temperature High

P0302 Missfire 2


So bascially all the cylinders Misfired at one point. Looks like both Exhaust banks are showing lean. With a high air intake temp.


The car is at the shop now, just a local indy. We sort of laughed with this many codes. Seems like its just 1 or 2 sensors blowing this issue out of proportion.

Any help/advice?

or any other forums that would be wise to post this?

Thanks!

Larry

[Redgoat]

anytime your dealing with misfires you can make the cat glow red

[absolutegtr]

Vacuum leak perhaps

[Killerteve]

"shakes and loses power" could always be coilpacks. They're such a simple problem but if you're not familiar it can seem serious. Do 3.0's suffer from the same cp problems as 1.8's?

[chinaonnitrous1]

Thanks so far...

we've checked for vacum leaks to no avail.

The coils are red in color. I remember seeing an R on top of one....

[chinaonnitrous1]

*bump for 1st page*

=D