Specs for spanner wrenches for the KW v2 for a B6A4 Avant

[AvanTTix]

not having much input in the Brakes and Suspension forum so i'll ask here... i'm finally getting around to buying spanner wrench(es) for my KW v2 suspensions since they didn't came with the wrench, but i'm not sure which one i need.

from KW's website, there are 2 types of spanner wrenches:
1. KW 80mm Spanner Wrench, designed for square notch perch.
2. KW 100mm Spanner Wrench, designed for round notch perch.



based on this pic of my KW V2, i think i need the ones for the square notch perch:



but i just wanted to double check... hopefully someone who either has KW and has had experience with/knowledge about them could let me know... TIA!

[Arclight]

My Vogtlands have almost exactly the same ride-height adjustment setup (without seeing the rear perches). IIRC, one wrench (large) works for the front, and one (small) works for the rear. Either way, just order both...

[PCYC]

jsut order both it will be easier in the end

[Condo]

I bought my KW V2s used and they didn't come with the wrench either. I tried to buy one directly from KW and the one they shipped me didn't work. I ended up using a wrench from a set of Koni coilovers. I'll try to find the wrench tonight and get back to you about which one to use.

[ungucpho]

i called kw and order one when I sold my coilovers

[Condo]

Here is the wrench that I used. Looks closer to number one.

[3ohAvant]

its nice to have both.

Hey, if you want, i can let you use mine, till you get yours in the mail. Mine came w/ my KW setup.

[AvanTTix]

thanks guys ...

i've ordered the 80mm one... based on Condo's pic i'd say it's the square one which is what i originally thought...

btw here's a place that sells them since i'm too lazy to call KW and their shop website doesn't list these individually...

[AvanTTix]

Okay so I thought I would follow-up on this and mention that both wrenches are needed. Both the 100mm and 80mm are needed for the fronts, but for the rears only the 80mm.