VAG COm questions

**msharifi** · 11-03-2008 12:13 PM

Hi there,

I have 2 questions.

1. How do you change the setting so the auto clock updates from the NAV.

2. How do you program the remotes to roll the windows up and down.

I know you can program it via VAG com but dont know the settings now to.

**inaforest** · 11-03-2008 12:15 PM

search!

**msharifi** · 11-03-2008 12:20 PM

Searching! have not found yet...

what I dont like here is that when you have a question someone else posts and says Search... if you dont have answer to it then dont write.....

**A4A4A4** · 11-03-2008 12:31 PM

http://www.audizine.com/forum/showth...hlight=vag-com

This is from the b7 a4 section but I'm pretty sure the codes are the same for the b6.

Hope this helps.

**msharifi** · 11-03-2008 12:37 PM

I read that one but someone said every car is different B7 and B6 if its AWD etc. well mine is B6 1.8 T AWD.

**ThreePointOhh** · 11-03-2008 12:40 PM

the codes in that thread worked find for me. just try it why dont you?

**msharifi** · 11-03-2008 12:45 PM

I will try it tonight. You know how Audi's are... I dont want to code it wrong and next thing you know something fails..

**ThreePointOhh** · 11-03-2008 12:50 PM

just make sure you write down the original codes so you can put them back if you mess things up. you shouldnt though. it's fairly straight forward. good luck!

**A4A4A4** · 11-03-2008 12:52 PM

I'm pretty sure b6's and b7's have the same codes, only the b5's differ. Also, I believe it does not matter what drivetrain you have or what engine you have as long as it's the same platform the codes are the same. Either way, I'd just try it out and see if the codes, what's the worst that could happen? If they don't work just plug back in your original codes.