Lowering Springs for S-Line

[AWDTURBO]

well the 08 slines are pretty high, i have the 08 sline but no sport package .. its monster trucking :(

[kosmickid]

well the 08 slines are pretty high, i have the 08 sline but no sport package .. its monster trucking :(

Sorry i dont understand. You have a S-line but no sport pack? So you are running stock A4 ride height??

[AWDTURBO]

Well i bought my car from the dealership with the sline package. You know, front and back bumper and the door things.. but my car looks like it has the reg a4 stock height :( ..

all 08 a4 came sline package i assume

[NorcalPB]

Is it bad to be running any of these springs without the replacing the sline shocks?

[bblume]

The better question who here has done the drop with these different brands
of springs that know for sure they have s-line (red shock housing) suspension.
And what is H&R's drop since they seem reputable but have no info on the
our FAQ???? And also what it looks like with just our puny little 18s???

[Bmeister]

Is it bad to be running any of these springs without the replacing the sline shocks?

It depends. If you go to a serious racing spring with ~2+" drop or even the stiff "street" H&Rs at 1.5", a stock shock (non-sport shock) will yield a more bouncy ride as its valving was not designed for the stiffer spring rate.

The Eibach Pro springs, being 1.5" drop but with a progressive spring rate, may enable you to use your stock shocks without as much bounce as they are softer than H&Rs at the initial compression moment of regular driving. However, stock non-sport shocks will wear exponentially faster with lower and stiffer springs no matter what you use if the springs drop the ride height.

[Bmeister]

A better side angle of the Eibach + Koni FSD on the B7. I'm about 25.5" from front fender lip to the ground. The wheels are stock 17".

[Bryan]

A better side angle of the Eibach + Koni FSD on the B7. I'm about 25.5" from front fender lip to the ground. The wheels are stock 17".

Hey, can u take more closer pic...I want to see the gap betwwen fender and wheel.. coz I am thinking to get this springs...