Need work done? Click here...

[317ssayzarc]

Hey guys, thanks for looking...

My names Jake, alot of you guys may already know me on here. I'm currently able to do anything automotive at the moment, due to being laid off last week. I worked at a high end european shop for several years, with the core work being Audi/VW, BMW, Mercedes and Porsche, with a hearty helping of $100k+ exotics on the side. I'll do most work for $50 per hour, which is about half of what the going shop rates are these days. I also can source parts, OEM or aftermarket (I am an affiliate for 034 and have lines for MANY others). To give you an example of what range of services I offer, take a look at the last few side jobs I've done or am doing: Coilovers on a MK3 Jetta; fabricating a downpipe, hot side intercooler pipe, turbo inlet and cat back for a big turbo B5 A4; timing belt on a MK4 GTI 1.8T; Rods on a 20th Anniversary GTI; subframe, control arm, oil pan, ball joints on a MK4 Golf; ect...

Feel free to shoot me a pm, I will do my best to quote exactly, but it all depends on the job. I am based out of my shop in West Warwick RI, and can arrange tows for those who cannot drive the vehicle to my location. Thanks for reading.

Regards -Jake

[AudiA4_20T]

bump for one of the best guys in the community... probably the only guy id ever let touch my car besides me

[317ssayzarc]

Thanks Clint!!!!

[Wizard-of-OD]

Bump for Jacob

[317ssayzarc]

Thanks Issam!

[317ssayzarc]

Im thinking its about time for a bump

[B597]

how much for a spring install on a MKV gti?

[AudiA4_20T]

Jake is a beast... he buys me free parts! LOL

[317ssayzarc]

how much for a spring install on a MKV gti?

$250

[317ssayzarc]

Jake is a beast... he buys me free parts! LOL

I will slaughter you

[SuperAvant]

You ever done a timing chain/guides on a B6 S4?

[317ssayzarc]

You mean cam tensioner?

[SuperAvant]

Dont think I need new tensioners...usually just the guides. But I guess I could change the chain tensioner at the same time...

[317ssayzarc]

I'll look up book time on that job, I'm guessing it'll be a biggie... That just means you will save more compared to going to another shop or dealer

[rsquattro]

I'd also maybe be interested in that same thing down the line...I have 70,125 miles on mine now.

[dak360rt]

Wish i lived on the other coast, good luck bud

[317ssayzarc]

Thanks man, I truly appreciate that

Everything's going well beyond my wildest expectations, look for some really cool projects to come out of my shop in the next 2-3 months

[317ssayzarc]

Its a little overdue for a BUMP!

[AudiA4_20T]

no its not

[317ssayzarc]

no its not

Shove it up your ass sweetheart

[{PMS}fishy]

Its a little overdue for a BUMP!

Rent bay space? I can do the work myself, it just looks a little sketchy in a Boston parking lot.

[317ssayzarc]

Rent bay space? I can do the work myself, it just looks a little sketchy in a Boston parking lot.

No sorry

[Senna4Life]

Hey Jake...my friend was wondering timing belt/wp etc for an AEB..he has all the parts minus coolant

[317ssayzarc]

$350

[SuperAvant]

I'll look up book time on that job, I'm guessing it'll be a biggie... That just means you will save more compared to going to another shop or dealer

You ever find out the cost on the timing chain for the 4.2?

[317ssayzarc]

Damn, sorry... I'll get that when I get back in about a week. I'm flying out to CA today and driving a car back

[SuperAvant]

Damn, sorry... I'll get that when I get back in about a week. I'm flying out to CA today and driving a car back

No problem

[A6.S-line]

You're not in Western Mass (sat) or Boston (sun) this weekend by any chance, are you? My gf wants to get her dice ipod kit installed...

[Das General]

You're not in Western Mass (sat) or Boston (sun) this weekend by any chance, are you? My gf wants to get her dice ipod kit installed...

DoWerk has a new shop in Southern Rhode Island. If you are in NYC, I'd say you are mere 2.5 hours from DWG. I am sure Jake can set you up if you are in the area.

[Volcano_black99]

How much for :

- 4 control arms + tie rod ?
- left CV Axle

I already have have the parts.

Thanks.

[as4driver]

Could you pm me the labor for a clutch and flywheel on a a4 1.8t AEB.

Thanks
Evan

[DxC]

bump this thread ... and make my s4 single turbo GT42 :)

[317ssayzarc]

All pms replied...

[Euro-Tuner]

damn Jake, doing good!

[mad70sx]

Hello!

Could you give me an idea what you would charge for a coilover/sway bar install and set-up on an '04 S4?

Thanks.

[Jake39454]

This thread can be deleted now, I opened a shop and we just moved into a new 1800sq ft facility and purchased a new Bendpak lift among other things. Please pm me on this account with any more inquires, thanks! Regards, Jake @ DW Garage

[RogueStatus]

you bought a shop?! damn. might have to swing down !

[Jake39454]

Yessir Kyle

[Das General]

Current project, for those curious about what goes on at DWG







Big ups to Stefan who took the shots, who recently dropped his car off for a 35r built motor B7

Keep up the solid work Jake/Ryan.