Name that piece ...

[Sp@cE418]

And if you could, the number and how to change it ...

Here's the story...

My car won't start ...
It wasn't the starter because when i turned the key, there was a "click" sound ...

So I thought about the clutch sensor ...When I looked at it, It was just fine but maybe a defect one...BUT I looked further and realized that the little piece of plastic behind the clutch sensor with a spring in it that make contact with the sensor was broken ...I said WTF !!!

So, now I have unwired the two wire on the connector and wired together to simulate that I have my clutch pedal push on the floor. Now, I start my car on neutral by not touching the clutch anymore ...

BTW, don't ask me how did this break beacause I really don't know ...

Long story short ...
Do you know what is this piece ?
Hard to change ?

[MacDaddy]

just do what the british do, get in the car, give the gear shifter a push side to side to make sure its in neutral then start it. those switches are only there in case of dumbassness.

[Sp@cE418]

just do what the british do, get in the car, give the gear shifter a push side to side to make sure its in neutral then start it. those switches are only there in case of dumbassness.

Sorry I think I don't understand your humor ...

[lonestar22]

yeah i wouldnt worry about it, just make sure u have your ebrake up and your car in neutral when u turn it off and things should be fine

[Sp@cE418]

yeah i wouldnt worry about it, just make sure u have your ebrake up and your car in neutral when u turn it off and things should be fine

Yeah i know that but i want to replace the parts ... now it's not wired very well and I don't want to leave it that way ...

Can someone help me out ?

[Sp@cE418]

Nobody ?

[infinkc]

Looks like 2 bolts and your set.

[Sp@cE418]

Looks like 2 bolts and your set.

Thanks ! You're my man !

[Sleeeper X]

Looks like 2 bolts and your set.

I want that program!