Starting new project in the spring - RS4 content

[eurogruppe]

From this:



To this:

My original plans for the spring was to get my front end (bumper and hood) resprayed to get rid of the rock chips etc. by my friends body shop...UNTIL i came across this website with the intention on buying a new grill, and then i came across this...









..... now i've never been a fan of body kits, however this seems to be a quality high end product and im set on going through with it.

The kit can be found on www.lltek.com for about $1500.

Update:

I decided to use these tips on my exhaust to flow with the rear valence, yet again something different ha




let me know what you think

[Charlescrs6]

B6's are great looking cars, why would you want it to look like a b7?

[eurogruppe]

B6's are great looking cars, why would you want it to look like a b7?

i always loved the way the b6 looked from the rear, but liked the front end on the b7, i believe its the best look of both. It might just be me?

[dirtybrd]

The B7 does have a more aggresive look to it.

[El_Chapusca]

I like it B7's have no snouts anyways. Its something different but to each his own
but then again it looks like a volvo

[absolutegtr]

this has been discussed since that kit came out, lol!

The lines of the b7 just dont really match up.....plus the nose just protrudes too much

[eurogruppe]

is there a member on here that has done it?

[Charlescrs6]

the only thing i like is the rear body kit which looks like the b7 rs4 but actually looks goooood

[eurogruppe]

and after comparing the 2 front ends, i do think the kit will make it look alot more agressice, and it also seems to make the front end sit alot lower, compared to the original front

[A4 KiDD 810]

Ohh God....hang on to your flame suit.


If you do do it in the end... at least drop it alot so it doesnt look like a 4x4 RS4 like the one in the pic lol

[eurogruppe]

haha o ya man i forgot to mention that, im def. gonna drop it before the kit is on..

[El_Chapusca]

why dont you go for this instead even thou i kinda looks like a USP front

[PCYC]

I think it would be cool

[eurogruppe]

why dont you go for this instead even thou i kinda looks like a USP front

mines already a USP. and i liek the other one much better

[trueno429]

i'll buy your front usp bumper if your willing to sell it for a reasonable price

[eclimax13]

why not do this conversion which is much cheaper?
http://estrictlyforeign.com/asp/prod...gory=1&ID=2318

[eurogruppe]

why not do this conversion which is much cheaper?
http://estrictlyforeign.com/asp/prod...gory=1&ID=2318

Im not a fan

[Charlescrs6]

Im not a fan

I like that one better than the LLtec

[EUROaleksey]

^^^ its a fake, look at ur hood and at the one in the pic from that link

good luck dude, glad to see someone step up finally

[LampyB]

kit looks like total shit. sorry to be so blunt, it's soo cheap and doesn't fit at all.

[eurogruppe]

^^^ its a fake, look at ur hood and at the one in the pic from that link

good luck dude, glad to see someone step up finally

thanks man

[eclimax13]

it takes a super clean looking car and turns it into sub-zero from mortal kombat

[eurogruppe]

the B7 front end doesn't even come close to matching the lines of the B6. it looks like an ugly redheaded step child. if you want a B7 buy one, don't spend $1500 on a seriously cheap looking kit. the pic shown at the top looks like a B6 with a pig nose or something very weird. kinda like the front of a dodge durango.

how are the lines of a b7 different than the b6??? The sides are completely the same, even the rear end with the exception of the tail lights. Doing this front end conversion will not ruin the "lines" of the b6 at all, and i actually dig the "pig" nose

[Charlescrs6]

^^^ its a fake, look at ur hood and at the one in the pic from that link

good luck dude, glad to see someone step up finally

isn't that just a boser in the pic?

[JumboBlack1.8]

http://www.audizine.com/forum/showthread.php?t=219358
The only way it should be done

[B6Lovin]

if you're talking about dropping 1500 on just the PIECES for that body kit, why not just do a b7 front end conversion with OEM parts? get ahold of greg, he can set you up with a list on a full B7RS4 front end, and then you could use the LLtek rear spoiler piece (which i actually think looks good)

you'd get the best of both worlds... the b7 front and the b6 rear

[eurogruppe]

if you're talking about dropping 1500 on just the PIECES for that body kit, why not just do a b7 front end conversion with OEM parts? get ahold of greg, he can set you up with a list on a full B7RS4 front end, and then you could use the LLtek rear spoiler piece (which i actually think looks good)

you'd get the best of both worlds... the b7 front and the b6 rear

your saying that oem rs4 front end peices will cost 1500? that would include the fenders, headlights, hood, front bumper, etc? if so then who is greg? i'd be interested.

[B6Lovin]

greg said that converting the ENTIRE car could be done for around 5 grand. (meaning door skins, quarter panels, tail lights, etc etc etc etc in addition to the front)

greg is 400HPA4 on the boards, and he's awesome to do business with. Shoot him a PM and talk with him on price, i'll try and find the list he threw up in another thread earlier tonight with all the part #'s you need.

[B6Lovin]

here you go -- this is the full list for the entire car.. i've put in bold what you should need for just the front

RS4 Conversion Parts

Left Rear Quarter Panel 8E5 809 839 B
Mounting for Left Taillight 8E5 809 649 A
Left Side Part Side Member (may not need, the side skirt attaches to it) 8E0 809 847 B
Left Side Skirt 8E0 853 859 D 7DL
Left side Skirt Front Holder 8E0 853 921 C
Left Side Skirt Rear Trim 8E0 853 579 E 7DL
Left Rear Door 8E0 833 051 K
Left Front Door 8E0 831 051 J
Left Front Fender 8E0 821 105 E

Right Rear Quarter Panel 8E5 809 839 B
Mounting for Right Taillight 8E5 809 650 A
Right Side Tank Flap 8E0 809 905 F
Right Side Part Side Member (may not need, the side skirt attaches to it) 8E0 809 847 B
Right Side Skirt 8E0 853 860 D 7DL
Right Side Skirt Front Holder 8E0 853 922 C
Right Side Skirt Rear Trim 8E0 853 580 E 7DL
Right Rear Door 8E0 833 051 K
Right Front Door 8E0 831 051 J
Right Front Fender 8E0 821 105 E

Hood 8E0 823 029 C (or E)
Right Headlight 8E0 941 029 AS (8E0 941 029 BM for RHD cars)
Left Headlight 8E0 941 030 AS (8E0 941 030 BM for RHD cars)
Lock Carrier 8E0 805 588 A
Front Bumper Cover 8E0 807 105 S GRU
Center Grill 8E0 853 651 L 3Fz
Left Foglight Grill 8E0 807 681 E 3FZ
Right Foglight Grill 8E0 807 682 E 3FZ

Trunk 8E5 827 023 AG (or AH)
Rear Bumper 8E5 807 303 F GRU
Rear Bumper Grill 8E0 807 833 3FZ
Aluminum Strip 8E9 807 443 G 1L1 (alu) GRU (primed)
Left Taillight 8E5 945 095
Right Taillight 8E5 945 095

[eurogruppe]

ok thanks man, so i assume the fenders are the same?

[B6Lovin]

ok thanks man, so i assume the fenders are the same?

whoops - forgot to highlight that. no they aren't. you'd need side markers too, i forgot about them lol

editing my last post now.

just talk with greg about what you need to get the conversion done for the least amount of money possible. you may be able to modify some of your stock body parts and make them work.

you also have to remember that the front is supposed to flow with the lines on the side... i think i may have been incorrect to say that this could be done cheaper. it does however look MUCH better since you're not adding another few inches to the front of the car.

maybe you can get certifit fenders (if not OEM) and section them in to your existing fenders so that you can keep your door skins and side skirts etc, but the lights and bumper will all fit.

[eurogruppe]

whoops - forgot to highlight that. no they aren't. you'd need side markers too, i forgot about them lol

editing my last post now.

just talk with greg about what you need to get the conversion done for the least amount of money possible. you may be able to modify some of your stock body parts and make them work.

haha yea modify (mold) the ugly sidemarkers the b7's come with haha.

only way im doing it though is if this comes out to 1500 or less, which right now i doubt it will but i might be wrong.

[B6Lovin]

yeah, i think the best way to do it if you want to keep your doors and skirts that the b6 comes with (in other words, keep this as confined to the front end as possible) would be to cut your stock fenders out where i have it bordered (very crudely lol) and then weld in the rs4 fenders. i have the flares marked for cutting too because the rs4's are wider and look badass



you may need to trim it further up or otherwise modify it to make the hood fit, but it might work with just replacing hte part which will border the headlights, lower hood, and front bumper.

like i said - talk to greg and see what can be done. and then talk to your body shop. if they're comfortable with this type of work it really should be mostly a walk in the park... everything bolts on but the fenders (and that's only if you want to cut/section them like i have above.. otherwise they do bolt on)

[aaaudiprotein]

I like the "b7" look on a b6. I think our headlights make it look pretty nice.

[BlackB6]

Ah damn, I loved the way your USP looked. You should sell me it and use that money towards a real RS4 and call it a day. What do you think?

[Charlescrs6]

just keep the F***** USP and lower it with coilovers, it will make it look just as good AHHHH

[docurley]

Just doing the RS4 OEM front bumper would be odd I think the DTM B7 might be the better option.

[chadb2434]

Good luck man! It would be a really sweet but very costly conversion when it's all said and done!

[docurley]

Good luck man! It would be a really sweet but very costly conversion when it's all said and done!

If you can find most of the parts from breakers and sell off your own parts the cost will be some what reduced.

Take the DTM version I mensioned the biggest cost would be the DTM bumper has it would be unlikley to be found at a breakers or even a S-Line unit.

Grill $150
S-Line Bumper $225
1 Headlight $150

This is what I can find in the US from hunting in the UK so I'm sure you guys could find more parts cheap.

[eurogruppe]

Its alot to think about at the moment, ive already had a few people interested in the USP parts which will make the cost of the new kit a little easier to pay for.