northeast racetec'rs

[eclimax13]

is my racetec going to be a bitch to install in this cold?...

[HIERLEVELZ]

Its cold but it aint that cold. Wear some thermals under a mechanics suit and a knitted cap and youre good to go. At least thats what I did the last couple days of workin on my car.

[LampyB]

if you've got a garage that isn't heated yes, just wear long underwear under jeans and a hoodie with a beanie. i've worked on my car through several winters in a non-heated garage. if working on a completely cold engine you may want to let it run for a few mins, then cool down to optimal working temp. overall it's the beer that keeps me warm ;)

i'd be too excited about that racetec to let ANY kind of weather slow me down!

[eclimax13]

ha...^^^ive got neither...ive worked in cold before..last winter working outside on trains...sucked so bad, luckily im back in a carhouse, i was basically asking if its a bitch itself to install

[317ssayzarc]

its just the start of the bitter cold my friend haha

[HIERLEVELZ]

Its my understanding that it should be relatively straight forward.

[eclimax13]

its just the start of the bitter cold my friend haha

this is why i want to get it in..i love winter..just not working in it...should be shipped friday from what im told...i hope so

[317ssayzarc]

this is why i want to get it in..i love winter..just not working in it...should be shipped friday from what im told...i hope so

Ill put it in for 150 bucks at my shop in Warwick RI if you'd like

[dougyfresh]

its just the start of the bitter cold my friend haha

Its cold out?

[eclimax13]

Ill put it in for 150 bucks at my shop in Warwick RI if you'd like

your out of your mind.......but im from warwick..where if your shop?

[317ssayzarc]

your out of your mind.......but im from warwick..where if your shop?

off of 117 near/in the ghetto

[eclimax13]

off of 117 near/in the ghetto

gotta be a little more specific than that....117 is a long ass road..lower that price down

[doublezero30]

your out of your mind.......but im from warwick..where if your shop?

i would like to know too. i went to school in warwick for 2 years.

as to the OP, start at 11am and it will be relatively warm. warm up as the day goes. and you should be done by 3-4pm before it cools down again.

ps-ill do it for $100

[eclimax13]

ill buy the booze ^^^and you must have gone to new england tech

[pizdetsauduxa]

if u dont kno wat ur doing go to nate, 100 bucks cant beat it.

[eclimax13]

if u dont kno wat ur doing go to nate, 100 bucks cant beat it.

this isnt a cant do situation...its a dont want to get caught in the cold situation from surprise hickups during the install...im not going to pay anyone

[317ssayzarc]

right near where 33/117 cross... ill match 100, no lower...

i went to neit too, didnt learn a fucking thing except how to tune on the dyno and steady state tuning... and that was the last quarter only, which was optional lol

[doublezero30]

ill buy the booze ^^^and you must have gone to new england tech

i did. and i dont like to drink while i work on cars, starts getting confusing and takes a lot longer haha

[pizdetsauduxa]

i did. and i dont like to drink while i work on cars, starts getting confusing and takes a lot longer haha

yea i remember i brought over the 12 of heinis u only had one hahah

[doublezero30]

^dont worry, you forgot them and i had the rest the next night

i went to neit too, didnt learn a fucking thing except how to tune on the dyno and steady state tuning... and that was the last quarter only, which was optional lol

i think it all depends on what you know going in and who your teachers are. i knew close to nothing going in and had some pretty good teachers besides one. a kid was fuckin around and asked my brakes and suspension teacher how to bleed air brakes, and the teacher seriously tryed to answer it before tellin us he didnt know. lol

[pizdetsauduxa]

i didnt forget them, i left them for u...wats funny remember those rain visors i put on that day that i said i dont think i like, on the way back some dick in a volvo thought he was a badass so as i passed him my drivers side one snapped off and hit his windshield, i ripped the other 3 off later that day.
p.s. fuck that exhaust haha

[audikid66]

racetec took me and my buddy about 4 hours start to finish...very straight forward and easy install nno cutting of the bumper required

[317ssayzarc]

^dont worry, you forgot them and i had the rest the next night



i think it all depends on what you know going in and who your teachers are. i knew close to nothing going in and had some pretty good teachers besides one. a kid was fuckin around and asked my brakes and suspension teacher how to bleed air brakes, and the teacher seriously tryed to answer it before tellin us he didnt know. lol

I had some fantasic teachers... The only problem is they have to teach from the lowest level up, so they start at retard and work up from there for 10 weeks... They never got to the point of teaching me anything, but I did have 2 yrs in the field by that point... The reason my extra quarter was a learning experience was because it was optional... So all the idiots were left behind to fail, and I really learned

[eclimax13]

i did. and i dont like to drink while i work on cars, starts getting confusing and takes a lot longer haha

well you dont get drunk..shit...i cant work on cars without a little booze...well i can but i dont want to..ha..i guess my buddy has a hook up at hanscom afb to rent a bay with a lift for $3 an hour so ill prob go with that..

[eclimax13]

i belonged to the gym across the street from new england tech and used to live on the other side of the airport

[gdawg'05a4]

eh, not that hard Tom. Took me about 4-5 hours to install with the car on jack stands. Really straight forward to do. The only pain was getting the piping to line up properly.

[widgget]

Lol, It Not Cold Yet!!!!!

[Papachristou]

id agree with the others... 4-5 hours tops. if you read the instructions first and familiarize yourself with all the tools and what not it could be quicker. the only parts that will be tricky in the cold are the clamps and the bumper bolts. just wear some gloves.... u be ok

[eclimax13]

eh, not that hard Tom. Took me about 4-5 hours to install with the car on jack stands. Really straight forward to do. The only pain was getting the piping to line up properly.

saw you going down rt 9 sunday...the car looks good going down the road