Audizine - An Automotive Enthusiast Community

Results 1 to 5 of 5
  1. #1
    Veteran Member Four Rings redlabel81's Avatar
    Join Date
    Nov 24 2007
    AZ Member #
    22812
    My Garage
    A4 1.8TQ 2005.5 + A6 1.8T 1998
    Location
    Tromsoe, Norway

    Fitting a B7 steeringwheel to a B6??

    Guest-only advertisement. Register or Log In now!
    Can it be done?

    Regards
    Eirik
    Life is too short to drive ugly cars!
    .................................................. ....
    Phantom Black B7 A4 1.8TQ Avant
    //BSR PPC stg 1, 98 Oct//BSR cat back//S-line front rebuild//S-line suspension//Supersport loweringcaps//Votex valence//S4 doorblades//RS4 mirrors//S-line roofspoiler//S-line door sills//LED interior//Hoen fogs//mTec 6000k HID//RNS-E//S4 grill//MMR HR4//H&R 8mm//Dectane HL//LED licenseplight//Euro RS4 steering wheel//Sonniboy "Tint"//RS4 rear sway//

  2. #2
    Veteran Member Three Rings PCYC's Avatar
    Join Date
    Sep 07 2007
    AZ Member #
    20902
    My Garage
    04 A4 3.0 6spd, 06 A6
    Location
    Atlanta GA

    Re: Fitting a B7 steeringwheel to a B6??

    yeah I think you need a hub ring. I beleive it's the part the wheel mounts too. You also need the elctronics and control module from the b7. I think the rs4 wheel or the flat bottom tt wheel is cheaper... Not sure tho

  3. #3
    Veteran Member Four Rings b6onboost's Avatar
    Join Date
    Jan 10 2007
    AZ Member #
    14767
    Location
    VA

    Re: Fitting a B7 steeringwheel to a B6??

    Yes. Someone fit a B7 multifuntion wheel to a B6. Worked in conjunction with the RNS-E too.

  4. #4
    Veteran Member Four Rings redlabel81's Avatar
    Join Date
    Nov 24 2007
    AZ Member #
    22812
    My Garage
    A4 1.8TQ 2005.5 + A6 1.8T 1998
    Location
    Tromsoe, Norway

    Re: Fitting a B7 steeringwheel to a B6??

    So you need the electronics aswell? :P
    Life is too short to drive ugly cars!
    .................................................. ....
    Phantom Black B7 A4 1.8TQ Avant
    //BSR PPC stg 1, 98 Oct//BSR cat back//S-line front rebuild//S-line suspension//Supersport loweringcaps//Votex valence//S4 doorblades//RS4 mirrors//S-line roofspoiler//S-line door sills//LED interior//Hoen fogs//mTec 6000k HID//RNS-E//S4 grill//MMR HR4//H&R 8mm//Dectane HL//LED licenseplight//Euro RS4 steering wheel//Sonniboy "Tint"//RS4 rear sway//

  5. #5
    Senior Member Three Rings edge19lw's Avatar
    Join Date
    Mar 24 2007
    AZ Member #
    16692
    My Garage
    03' a4 3.0
    Location
    Queens, NYC

    Re: Fitting a B7 steeringwheel to a B6??

    yes you need the ring and its your choice also if you want to upgade to the b7 dual stage airbag (b6 is single stage, i dont think you can use the b6 one either), but someone on another thread who actually put an rs4 wheel on with the b7 airbag crashed and supposedly it didnt deploy. i'll post the link up if you want when i get home
    2003 A4 3.0 | Trunk Lip Spoiler | CC mod | Bilstein/H&R | RS4 Rear Sway Bar | K&N drop in filter | 23% Tint | Magnaflow 14851's & Magnaflow 10415's

    -Thomas

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.