headlight adjustment problems

[Agent Avant]

Hey guys, I've got some xenons housings (non auto adjust) and for some reason, the adjustment screw on one of my headlights does not work. When I turn it either way, it doesn't adjust, and just "clicks". Are there any solutions?

Thanks!

[Sanjman]

how do you have xenons without auto leveling in america? Those only came out everywhere else... You sure your auto leveling is not broken?

[Agent Avant]

These came from Jens, so they aren't american.

[Agent Avant]

Anyone?

[Doctor]

Didnt know there were OEM Xenons without auto-leveling...Cant help sorry

[Robr10]

I have the same thing too, mine need to be adjusted as well. they too are not autoleveling... but the right lens is aimed a bit high, and wanted to adjust it lower... any suggestions?

[supamannn99]

this adjusts the height of the cut-off right? i've been wanting to do mine but i don't know how. where is it? can you get me a picture ?

[Agent Avant]

Ok guys, I still don't have an answer. Let me rephrase my question. My headlight (bixenons, non auto adjusting, similar to halogens) is broken. The screw that is used to adjust the light up and down does not work any longer. When I turn it either direction, it moves about 1/4 turn, then clicks, adjusting nothing. At the moment, it is turned way too high and I am blinding everyone at night. I don't care if I need to take apart the headlight to fix this, just that it can be fixed, or if anyone has had this problem before. Thanks!

[peta8368]

have you tried loosening the screw on the tab on the top and adjust the entire housing a little? the bottom tabs are designed to flex a little bit, so if you loosen the top tab, you should be able to move the housing slightly.

i'm actually on the opposite end of you. My housing is aimed all the way up already, but it is still too low. However, i haven't tried the adjusting screw yet. Can you take a picture of where this adjusting screw is? Thank you.

Peter

[Agent Avant]

hmm, thanks, ill give that a try.