any splitter for stock bumper?

[03CrysBlueB6]

any lower lip or splittrer for the stock bumper?? pictures would help!

[cjonesgo]

I don't have pics, but I remember seeing someone here put the SEAT Culpra R Splitter onto a stock (non usp) bumber. Now that I think about it, I may have seen a pic from a seller on ebay as well.
I don't remember thinking it looked that good.... Probably why I can't remember any specifics.

[inaforest]

Vinny Mod


:D

[03CrysBlueB6]

yeah the vinny mod isnt that bad on a stock.. but the lip goes up which makes it really difficult

[Stockton]

What is this vinny mod?

Any links?

[03CrysBlueB6]

search splitter under the B6 forum... youll see it

[Pothole]

i was looking a while ago for a stock bumper with the vinny mod on it, could never find any pictures, any one got any ?

[Smitty2A4]

Here are some pictures on a stock A4 bumper, they were taken from the original "Vinny Mod" thread here...

http://www.audizine.com/forum/showthread.php?t=227310






I don't think it looks that great, mainly because the stock A4 bumper is not flat at the bottom, so its hard to attach and just looks off. I wanted to do some sort of splitter to my stock bumper too, but I decided I am just going to wait, nothing that I have seen really looks very good.

[El_Chapusca]

Do you mean something like this

[Pothole]

ya i agree, they look so cool on the usp bumber, not so much on the stock bumber, but i do have some of the garage door seal stuff laying around........

[Smitty2A4]

Do you mean something like this

That looks pretty decent, maybe because the car is black with painted lowers, do you know if that is a Cupa-R?

[FourRingsB6]

They are right. The Cupra R spoiler will work but it isn't a direct fit and will take a little work to get it on. You can order it through tmtuning. Here is a link for you: http://www.tmtuning.com/HOME/catalog...t_product=1660

[03CrysBlueB6]

thanks man i guess that doesn tlook half bad

[[email protected]]

Do you mean something like this

This is sweet!!! I've never seen a non-vinny mod on a non-usp bumper, lip. What is it and where do I get it???

[phsingl]

agreed - that cupra R splitter looks pretty sharp even on the stock bumper. Anyone know if its at all functional?
I know they are supposed to be about high speed stability but I suspect the butchering necessary to get it on the front of a stock A4 may negate that. I wonder though with the opening at the front if it helps deflect any air over the FMIC/radiator?

[ben light]

That looks pretty decent, maybe because the car is black with painted lowers, do you know if that is a Cupa-R?

This is my buddy Jeff's car. Yes it is a Cupra lip. If you want to message him, his screen name on here is AKORDBOY.

[Arclight]

I saw AKORDBOY's car in person at H20i and it looked good. I agree w/ Smitty2, it's the black car color that made it look like a factory option piece. IMHO, I'm not sure this splitter would look so good on a lighter color...

[akordboy]

I saw AKORDBOY's car in person at H20i and it looked good.

Thanks!!

[Smitty2A4]

Thanks!!

So was this thing a big PIA to fit on the stock bumper? What did you have to do, trim it a bit?

[Charlescrs6]

So was this thing a big PIA to fit on the stock bumper? What did you have to do, trim it a bit?

you can also do the garage door bottom method.... if you wanna go the cheap route

[Alphazuzu]

how well does the S4 lower bimper fit on an OEM A4??

[BlackB6]

This picture almost made me throw up.

[REDLINE]

why not just buy a USP lower for ~$175 and turn ur front into sexy time

[akordboy]

So was this thing a big PIA to fit on the stock bumper? What did you have to do, trim it a bit?

Wasn't all that bad. I used 2 HHCS's and fender washer's on the center thingies (sorry...having a hard time thinking today) and then used self tapping screw on all the tabs. You want to pre-drill all you holes on the tabs before you install it. It does have to be trimmed though on the sides where it meets the mud flaps. Took all about an hour from start to finish (I was taking my time).

[ThatGuyAlex]

why not just buy a USP lower for ~$175 and turn ur front into sexy time

where do you get it from?

[yung turbo]

where do you get it from?

http://shop.dthaus.com/product.sc?ca...2&productId=35

[AudiA4Style]

There's also the JP Vizage front lip

[4Rings3Liters]

Check out the Kerscher front splitter.

[REDLINE]

its cheaper on http://www.genuineaudiparts.com/